From this trial:

• No crop response to the addition of Zinc. Soil and plant tests not in the deficient range.

From the whole project:

• Current guidelines are still relevant and effective for TE management.
• Some current interpretations of soil tests are causing issues - the suggested levels to avoid deficiencies are much higher in some lab reports than is our experience from field trials. These are creating false impressions of the extent and severity of Zn and Cu deficiencies.
• No evidence of a major increase in the incidence or severity of TE deficiencies in the cropping zones.
• Fluid delivery of TEs at seeding is a valid management strategy but rates of the target TE need to be the same as used with compounded fertilisers.
• Generally, all sources of foliar TE were equally effective.

From this trial:

• No crop response to the addition of Zinc. Soil and plant tests were in the deficient range. As a foliar spray, sulphate was as effective as two chelate sources for increasing leaf zinc at Z30.

From the whole project:

• Current guidelines are still relevant and effective for TE management.
• Some current interpretations of soil tests are causing issues - the suggested levels to avoid deficiencies are much higher in some lab reports than is our experience from field trials. These are creating false impressions of the extent and severity of Zn and Cu deficiencies.
• No evidence of a major increase in the incidence or severity of TE deficiencies in the cropping zones.
• Fluid delivery of TEs at seeding is a valid management strategy but rates of the target TE need to be the same as used with compounded fertilisers.
• Generally, all sources of foliar TE were equally effective.

From this trial:

• No crop response to the addition of zinc. Soil and plant tests not in the deficient range.

From the whole project:

• Current guidelines are still relevant and effective for TE management.
• Some current interpretations of soil tests are causing issues - the suggested levels to avoid deficiencies are much higher in some lab reports than is our experience from field trials. These are creating false impressions of the extent and severity of Zn and Cu deficiencies.
• No evidence of a major increase in the incidence or severity of TE deficiencies in the cropping zones.
• Fluid delivery of TEs at seeding is a valid management strategy but rates of the target TE need to be the same as used with compounded fertilisers.
• Generally, all sources of foliar TE were equally effective.

From this trial:

• No crop response to the addition of zinc. Soil and plant tests not in the deficient range.

From the whole project:

• Current guidelines are still relevant and effective for TE management.
• Some current interpretations of soil tests are causing issues - the suggested levels to avoid deficiencies are much higher in some lab reports than is our experience from field trials. These are creating false impressions of the extent and severity of Zn and Cu deficiencies.
• No evidence of a major increase in the incidence or severity of TE deficiencies in the cropping zones.
• Fluid delivery of TEs at seeding is a valid management strategy but rates of the target TE need to be the same as used with compounded fertilisers.
• Generally, all sources of foliar TE were equally effective.

From this trial:

• No crop response to the addition of Zinc. Soil and plant tests were not in the deficient range.

From the whole project:

• Current guidelines are still relevant and effective for TE management.
• Some current interpretations of soil tests are causing issues - the suggested levels to avoid deficiencies are much higher in some lab reports than is our experience from field trials. These are creating false impressions of the extent and severity of Zn and Cu deficiencies.
• No evidence of a major increase in the incidence or severity of TE deficiencies in the cropping zones.
• Fluid delivery of TEs at seeding is a valid management strategy but rates of the target TE need to be the same as used with compounded fertilisers.
• Generally, all sources of foliar TE were equally effective.

From this trial:

• Grain yield increased by 7% with the addition of zinc. Effectiveness of fertiliser strategies could not be assesed with such a small increase in yield. Soil and plant tests were in the deficient range. At Z14 zinc enriched fertilisers at sowing increased leaf zinc. At Z30 a sulphate as a foliar was as effective as an EDTA chelate. 

From the whole project:

• Current guidelines are still relevant and effective for TE management.
• Some current interpretations of soil tests are causing issues - the suggested levels to avoid deficiencies are much higher in some lab reports than is our experience from field trials. These are creating false impressions of the extent and severity of Zn and Cu deficiencies.
• No evidence of a major increase in the incidence or severity of TE deficiencies in the cropping zones.
• Fluid delivery of TEs at seeding is a valid management strategy but rates of the target TE need to be the same as used with compounded fertilisers.
• Generally, all sources of foliar TE were equally effective.

From this trial:

• No crop response to the addition of Zinc. Soil and plant tests were in the deficient range. Zinc applied at seeding either as a granular fertiliser or as a fluid fertiliser increased leaf zinc Z14.

From the whole project:

• Current guidelines are still relevant and effective for TE management.
• Some current interpretations of soil tests are causing issues - the suggested levels to avoid deficiencies are much higher in some lab reports than is our experience from field trials. These are creating false impressions of the extent and severity of Zn and Cu deficiencies.
• No evidence of a major increase in the incidence or severity of TE deficiencies in the cropping zones.
• Fluid delivery of TEs at seeding is a valid management strategy but rates of the target TE need to be the same as used with compounded fertilisers.
• Generally, all sources of foliar TE were equally effective.

• Yield losses caused by Pratylenchus are still being defined, in the meantime growers should focus on implementing management strategies to reduce impact of Rhizoctonia; most of these also reduce impact of Pratylenchus.
• Cereal cyst nematode (CCN) is a potential risk this year, particularly in continuous cereal paddocks with high frequency of susceptible varieties e.g. Wyalkatchem.
• Take-all risk is also increasing in continuous cereal and cereal/grassy pasture rotations; this is driven by above average growing seasons on Eyre Peninsula for the past few seasons.
• Field trials are underway to assess the yield losses caused by Pratylenchus in current varieties. Results of the first trials indicate yield losses caused by Pratylenchus in 2011 were relatively small; this program is continuing to determine if losses are higher in different seasons.
• Pratylenchus multiplication varies between varieties, check the 2012 Cereal Variety Disease Guide for the latest resistance ratings. Note; some barley varieties are better hosts for P. neglectus than previously thought.

• The Yield Prophet uses the APSIM model to estimate wheat yields based on seasonal growing conditions and inputs.
• The outcomes of the Yield Prophet allow farmers to make better pre-sowing and in-crop management decisions which reduce risk and optimise returns.
• The Yield Prophet reports on crop growth during the season; availability of soil water and soil N; likely responses to N fertiliser; and calculates probabilities for yield and protein.
• The Yield Prophet is a web based service and accessible to subscribers and visitors on www.yieldprophet.com.au/yieldprophet.

Cultivation and variety selection affects the performance of a crop when root lesion nematode numbers are high. Removing medic fallow by cultivation in October increased wheat yields significantly. Lower disturbance methods such as short cultivation (February) and direct drill did not yield as high.

• This set of trials indicates that SACOA ‘Irrigator’ banded wetting agent can improve crop establishment and grain yield but that responses can be highly variable. The 27-32% yield increase seen in 3 of the trials is very encouraging. Based on these and other trials it can be suggested that banded wetting agents are most likely to be effective when:
• Soils are moderate to strongly repellent and there are few residual roots form the previous year’s crop; and points and tines are used for seeding.
• Banded wetter is applied in a consistent stream to the base of relatively stable furrows. Collapsing furrows, furrow infill and a disrupted band of wetting agent can reduce efficacy. Presswheels with a more rectangular cross section tend to rip up furrow walls and the disturbed soil buries and mixes banded wetting agent. ‘V’ section or round section presswheels with no deep flange reduce such problems.
• The banded wetting agent kit needs to be robust and reliable and needs to accurately apply the wetting agent in a continuous stream into the base of the furrow
• Crops sown early into dry or partially dry soil before opening rains derive more benefit from banded wetter. Banded wetting agents are typically less beneficial when used later in the sowing program when there has already been rain and the soil has started to wet up.
• Growers already using wetting agents are tending to modify their usage of banded wetter to better match the likelihood of significant benefits. Some growers only use banded wetter for the dry seeding or early part of the program and don’t use it later in the program after there has been more rain.  Other growers are planning to use higher rates of banded wetter early in the program but then aim to reduce the rates when sowing later in the season. Both of these strategies will reduce cost while maximising the opportunity for benefits to crop establishment and yield. Current research in the state is showing that different banded wetting agent products can have a wide range of effects of crop establishment and especially on yield. DAFWA is continuing to research a range of products to help growers evaluate which types of banded wetting agent are more suitable for their farming system.

• This set of trials indicates that SACOA ‘Irrigator’ banded wetting agent can improve crop establishment and grain yield but that responses can be highly variable. The 27-32% yield increase seen in 3 of the trials is very encouraging. Based on these and other trials it can be suggested that banded wetting agents are most likely to be effective when:
• Soils are moderate to strongly repellent and there are few residual roots form the previous year’s crop; and points and tines are used for seeding.
• Banded wetter is applied in a consistent stream to the base of relatively stable furrows. Collapsing furrows, furrow infill and a disrupted band of wetting agent can reduce efficacy. Presswheels with a more rectangular cross section tend to rip up furrow walls and the disturbed soil buries and mixes banded wetting agent. ‘V’ section or round section presswheels with no deep flange reduce such problems.
• The banded wetting agent kit needs to be robust and reliable and needs to accurately apply the wetting agent in a continuous stream into the base of the furrow
• Crops sown early into dry or partially dry soil before opening rains derive more benefit from banded wetter. Banded wetting agents are typically less beneficial when used later in the sowing program when there has already been rain and the soil has started to wet up.
• Growers already using wetting agents are tending to modify their usage of banded wetter to better match the likelihood of significant benefits. Some growers only use banded wetter for the dry seeding or early part of the program and don’t use it later in the program after there has been more rain.  Other growers are planning to use higher rates of banded wetter early in the program but then aim to reduce the rates when sowing later in the season. Both of these strategies will reduce cost while maximising the opportunity for benefits to crop establishment and yield. Current research in the state is showing that different banded wetting agent products can have a wide range of effects of crop establishment and especially on yield. DAFWA is continuing to research a range of products to help growers evaluate which types of banded wetting agent are more suitable for their farming system.

• Significant crop biomass responses were observed on wheat, barley and canola crops at anthesis.
• The large crop biomass responses under organic amendment treatments were largely due to extra nutrients from lucerne pellets.
• The dramatic crop biomass responses observed at anthesis on canola and barley crops did not translate into grain yield under treatments with lucerne pellets applied, due to severe lodging.
• Soil chemical, physical and biological properties will be monitored to understand the soil-plant interactions, the factors driving the differences in crop response to the various treatments and the residual value of the amendments.

• Subsoil acidity is a major constraint to crop productivity in the high rainfall zone (500–800 mm) of southeastern Australia.
• More aggressive methods, such as deep ripping in conjunction with lime or other amendments, are being tested to achieve rapid changes to pH at depth.
• A long-term field experiment was established to study changes in the chemical, physical and biological properties of soil under vigorous soil amelioration techniques.

• Sowing at the earliest opportunity (which requires rainfall) is an important component of reducing the risk of canola production in low rainfall environments.
• The amount of N available to the crop is critical to productivity in a canola crop that has established well.
• Applying adequate doses of fertiliser N at seeding or early in the crop’s development have produced the highest grain yields but this was less important in a wet spring like 2016.
• Legumes can provide N to a subsequent canola crop, but in many cases, canola growing on legume residue will still respond to fertiliser N inputs.
• Analysis of the profit-risk context for optimal N inputs for canola produced in low rainfall environments is underway.

• Incorporating seed behind press wheels resulted in the best crop establishment and one of the higher yields.
• A split application of seed, some broadcast in front of the seeder and some sown through the seeding boots shows promise.
• Soil wetters were ineffective for increasing emergence or grain yield.

Increasing plant density is a tool to improve a crop’s competitiveness against weeds. This strategy did not adversely affect the yield of the varieties at the Liebe Main Trial Site in 2012. 

Nitrogen treatments did not significantly influence crop yield however, did influence grain protein. The soil nitrogen levels and season are likely to have influenced this result. Soil testing and understanding the crops requirements as the season unfolds are useful strategies to manage crop performance economically.

The environment is likely to have had the bigger influence on the performance of the varieties than plant density or nitrogen. Growing season rainfall for 2012 was lower than average and disease patches (likely Rhizoctonia) were evident at the trial. The water use efficiency at the site was 13 kg/mm given growing season rainfall (April to October) was 133mm (plus 34mm in January) and grain yields of 1.98 t/ha across whole trial.

• Trials in the Condobolin area have shown excellent responses to topdressing in wetter years when the nitrogen requirement of the crop is higher than initially expected.

• In wheat an application rate of 20 kg N/ha in-season was sufficient to achieve the highest yield at Hart in 2017. However, it was the 80 kg/ha treatment which maximised yield and protein to achieve the best return on nitrogen fertiliser invested.
• For barley an application of 40 kg N/ha was adequate to produce the highest yield and quality within the trial.

• Manganese deficiency has been identified on light volcanic soils from Mounts Gambier and Schank, and heavy black soils from drained swamps near Penola.
• These soils are alkaline.
• Symptoms first appear as oval dead spots on the second leaf, especially along the margins (not on the first leaf).
• Availability of manganese is reduced in the alkaline soil.
• The deficiency can be cured by the application of manganese sulphate.

• Applying N at GS31 increased yield but no response to manganese was measured.

• There was a dry matter response measured at anthesis to all treatments with application of manganese but due to dry season this was not translated into yield increases.

• In a below average rainfall year, with a very dry finish gravelly sands were still highly responsive to applied P, with 0.6 t/ha response to 60 kg/ha P over the last two years and 30 kg/ha applied this year
• Nitrogen in the absence of phosphorus did not significantly increase yield at either site.  This highlights the requirement to get your P rates tailored to your potential at seeding time, as low P rates may limit N response in a good year.
• There was strong correlation between early vigour and grain yield at both sites, again highlighting the need to establish a strong, healthy crop with sufficient early nutrition.
• Increasing plant numbers did not result in increased grain yield on poor sands.
• This trial shows that on variable light country variable rate fertiliser applications would be a useful tool to improve nutrient use efficiency on variable sands, as both sites had significantly different yield potential and nutrient requirement.

• Early sowing (22 April) had the largest positive impact on canola yield when comparing a range of treatments trialled in 2015, similar to results observed in 2013 and 2014. Sowing on 22 April improved yields up to 12%, depending on variety, compared to 29 April sowing date.
• Different management practices are needed to establish canola on different soil types under marginal moisture conditions. On a loamy soil at Minnipa deeper sowing (to 4 cm) produced the highest yields, whereas shallower sowing (1 cm) produced the highest yields at Piednippie, particularly with the smaller seeded variety Stingray.
• Trials at Piednippie in 2015 showed that yields up to 0.8 t/ha are achievable in a below average rainfall season, provided the crop is established early and achieves around 50 plants/m2 in open-pollinated varieties.
• Results from similar trials in 2013, 2014 and 2015 have all shown that the highest yielding canola has consistently come from plots with plant establishments of over 50 plants/m2 for open pollinated varieties and 40 plants/m2 for hybrid varieties.

• Early sowing (22 April) had the largest positive impact on canola yield when comparing a range of treatments trialled in 2015, similar to results observed in 2013 and 2014. Sowing on 22 April improved yields up to 12%, depending on variety, compared to 29 April sowing date.
• Different management practices are needed to establish canola on different soil types under marginal moisture conditions. On a loamy soil at Minnipa deeper sowing (to 4 cm) produced the highest yields, whereas shallower sowing (1 cm) produced the highest yields at Piednippie, particularly with the smaller seeded variety Stingray.
• Trials at Piednippie in 2015 showed that yields up to 0.8 t/ha are achievable in a below average rainfall season, provided the crop is established early and achieves around 50 plants/m2 in open-pollinated varieties.
• Results from similar trials in 2013, 2014 and 2015 have all shown that the highest yielding canola has consistently come from plots with plant establishments of over 50 plants/m2 for open pollinated varieties and 40 plants/m2 for hybrid varieties.

• Average grain yield was higher at Hart in 2011 (2.9t/ha) compared to 2010 (2.5t/ha) and 2009 (2.4t/ha).
• Similarly to previous favourable seasons, no sowing time response was observed in 2011.
• Blackspot severity was low in 2011 because spore release was high prior to sowing and emergence.
• A 4% yield increase was achieved through fungicide applications but this was not economical in 2011.
• Recently released PBA varieties Gunyah, Twilight, Oura and Percy all performed similarly to Kaspa.
• Potential releases OZP0819 and OZP0903 both yielded 8% higher than Kaspa, while Alma was the lowest yielding variety, 7% below Kaspa.

• Grain yield of field peas sown at Hart in 2010 averaged 2.5t/ha across all varieties.
• No time of sowing response was observed in 2010.
• Early sown plots with uncontrolled blackspot showed a 35% yield loss compared to the optimum control (fortnightly chlorothalonil), which yielded 3.6t/ha.
• Prospective releases OZP0703 and OZP0903 show a lot of promise, with OZP0703 performing similarly to Kaspa and OZP0903 yielding 10% greater.
• Chlorothalonil (Bravo), pyraclostrobin (Cabrio) and azoxystrobin plus chlorothalonil (Amistar Opti) increased yields compared to the nil treatment with disease pressure.

There is a difference between maximising biomass and the optimal biomass for maximum yield in a particular environment.

Maximising biomass creates agronomic problems such as increased foliar disease and early weed competition.

Irrigation can supply moisture during grain fill but cannot control the temperature - many of the winter wheats mature too late to avoid heat stress during grain fill. 

There is a difference between maximising biomass and the optimal biomass for maximum yield in a particular environment.

Maximising biomass creates agronomic problems such as increased foliar disease and early weed competition.

Irrigation can supply moisture during grain fill but cannot control the temperature - many of the winter wheats mature too late to avoid heat stress during grain fill. 

For take home messages in regards to fungicide, nitrogen and growth regular results please see the attached trial report.

• Despite three years of above average rainfall, a red calcareous sandy loam at Minnipa with soil phosphorus reserves of 27 mg/kg of Colwell P has not required any added P fertiliser for maximum cereal grain yields.

• In year 1 of this experiment, we demonstrated that genetically diverse wheat cultivars performed differently in two locations with varying rainfall patterns. Significant differences in crop biomass, LAI, weed count and biomass between  cultivars was also location dependent. These results show that although weed suppression in wheat is influenced by genotype, the genotypic response in wheat is clearly influenced by environmental factors as well, when it comes to growth, yield and weed suppression. However, certain cultivars were excellent performers in both locations in terms of weed suppression and crop yields and these included Espada and Condo and to a lesser extent Janz. Additional results will be obtained from metabolomic analyses to evaluate both primary and secondary biosynthetic pathways operational in crop genotypes and to determine if these pathways influence weed suppression in either location over time. The role of hydroxamic acids in weed suppression will be further examined in detail through targeted metabolic profiling in both soils and plant tissue. Additional field experiments will be repeated over the next 3 years to determine impacts of year and location upon wheat cultivar performance and weed suppression.

• The trial is showing clearly that the early years of no tillage come with a significant yield penalty in most treatments.
• This is most significant when coming out of a spray fallow as seen in both the ley/fallow/wheat treatment and the wheat/fallow/wheat treatment.

• Issues such as diseases and weeds are now starting to affect the profitability of the continuous wheat system.
• Minimum tillage needs ideal conditions at sowing to be successful on these soils.
• Seasonal variation has influenced cropping system comparisons, hence the need for the trial to continue into the future.

Continuous cropping has remained the most profitable rotation since the trial began, especially continuous wheat. This system however will not last, and will be less profitable in the next few years, as suggested by the GM variations in figures 6 and 7. For continuous cropping to be sustainable, a break crop is needed to keep the system working.

• Proper rotations (irrespective of tillage methods) incorporating no more than two cereal crops in sequence with the addition of either a break crop or a fallow once in every three years is ideal. This rotation allows a very productive and sustainable farming system in our environment.
• The most profitable system since 1999 has been two years of cereal followed by a break crop such as peas under no till.
• No till systems are now becoming more profitable in the trial than cultivated systems under every rotation.
• No till will work on our problem soils so long as effective weed control is achieved.
• Under a continuous cereal rotation, the impact of weeds, diseases, poor nutrition and subsequently lower yields has lowered profitability

• No-till has performed on average 5% higher in yield and increased profits over cultivated farming systems in continuous cropping rotations.
• Adding cultivation to the system has increased both yield and profit in the 18 month fallow rotations.
• Thirteen years of continuous wheat has produced the most grain per hectare, closely followed by a wheat–barley–field pea rotation.

• No barley varietal differences in tolerance to metribuzin applied either pre-sowing or post-emergent have been detected in 3 years of trials on sandy loam soils at Walpeup and Woomelang.
• Crop damage from metribuzin has been known to occur in some commercial situations so label advice should be adhered to.

• All cultivars gave their highest yield under higher fungicide and nitrogen input (High input management), but cultivars differed in their response to increasing input with Westminster being the least responsive (1.69t/ha increase from low to high input) and Oxford the most responsive (3.09t/ha).
• RGT Planet was the highest yielding cultivar, although its advantage over Westminster was only apparent at higher levels of input, under low input both yielded similarly.
• Disease control resulting from the later fungicide application at GS37 and GS59 was strongly implicated in the yield differences, particularly between low and standard input where there was no difference in N input.
• Disease (net form of net blotch) in Oxford was uncontrollable in this trial even under high input where yield was maximised.
• RGT Planet, RGT Conquest and Westminster showed no significant difference in grain protein across the three management levels, whilst the proteins of Granger and Oxford decreased as yield increased from low to high input.
• Granger and RGT Planet recorded the lowest grain screenings. There was no significant effect of management level on screenings with these two cultivars or Westminster.
• In contrast, Oxford and Conquest that gave the largest responses to higher input showed significant decreases in grain screenings as input was increased.
• The devastating effect of NFNB on Oxford in this HRZ environment was very evident in both yield and screening results. As later fungicide input was removed from the management program so was the yield with significant reductions in yield and increased screenings.
• Under the lowest input RGT Planet and Westminster were significantly higher yielding than other cultivars tested.
• Under the highest input RGT Planet was significantly higher yielding than all other cultivars tested and produced the highest gross margins at each management level.
• With the very high disease pressure in this trial, the higher fungicide input associated with the High Input management made this the most cost effective management program of the Crop Technology Centre trials.
• As a result of higher disease pressure unlike wheat (Protocol 1) higher inputs of fungicide were generally more cost effective in barley sown early, irrespective of cultivar.

• Two Mackillop Farm Management Group trials were sown to evaluate two BYDV management options across four wheat varieties.
• High Rainfall zone growers should be pro-active and develop a BYDV management plan.
• Up to date disease guides should be consulted when selecting varieties.
• Growers are encouraged to check for aphids regularly, especially early in the season.

• During the extremely dry 2006 season the addition of micronutrients had no significant effect on crop performance and there was no benefit, in terms of grain yield, from the application of nitrogen, regardless of product.
• There is no benefit to apply micronutrients when levels are adequate at GS30 and when there is a good history of applications.

• Wheat grown on highly calcareous soils responded to zinc and manganese applications.
• Micronutrients were most effective when they were applied in fluid form which provided economical responses.
• There was no grain yield response when granular micronutrients were applied as a dry blend with granular NP fertiliser or as a coating on granules.

On heavier soil types with higher levels of organic matter, using a speed tiller to incorporate a wheat stubble may assist in increasing canola yields. If incorporation occurs immediately post-harvest, then the addition of nitrogen may not be required if the soil nitrogen levels are adequate. If incorporation is delayed and occurs immediately prior to sowing, then the addition of nitrogen should be considered.

• Grazing did not change grain yield or quality. Rather, moisture stress was more important in a dry finish
• In a dry year, the ratio of grain yield to crop biomass at flowering is 0.40. In an average year it is around 0.55
• Grazing slows crop maturity by one to two weeks, which meant Revenue (long season variety) was still booting during the October heat wave 

• Depending on seasonal influence, stored soil moisture, soil nutrition, stocking rate management and correct timing (early tillering at growth stage (GS) 18-22, rather than later tillering at GS 24-28), grazing can be done with no detriment to crop yield.
• However, preceding paddock history had a significant impact on subsequent crop success and needs to be considered when planning future rotations.

• Crop intensive farming systems are running down soil carbon.
• Mixed species cover cropping offers a new approach that may address the issue.
• Local guidelines need to be developed so that farmers can make informed decisions about incorporating cover crops into their farming systems.

• Crop intensive farming systems are running down soil carbon. 
• Mixed species cover cropping offers a new approach that may address the issue.
• The cover crop species grown in 2019 had no influence on the growth, yield and grain quality of the wheat over-sown in 2020.

• There was an effect of Moddus on plant height, the length of node interval and cell wall thickness when compared to the untreated area.

• A slight reduction in height can be seen throughout the trial. Samples of Corack (early-mid season), Mace (mid-season) and Justica (mid-late season) were taken from both the Moddus and untreated area.
• The Moddus did not affect the maturity of the varieties.

• The difference in soil organic carbon (SOC) changes between nine sites across eastern Australia was largely characterised by mean temperature and rainfall.
• High temperature strongly interacted with management practices (stocking rate, nitrogen application and residue incorporation) to reduce carbon sequestration despite favourable rainfall.
   

Slow pasture growth rates during winter limit the potential gross margins from autumn and early winter
lambing in southern New South Wales (NSW) by limiting stocking rates and/or increasing supplementary feed
requirements. Dual-purpose crops can reduce the winter feed gap in mixed-farming systems by increasing
the available feed in winter. The simulation software AusFarm was used to model a mixed-farming system
at Wagga Wagga with Merino ewes joined to terminal sires and grazing lucerne-subterranean clover pasture
over a 41-year period. A paddock of dualpurpose wheat was then added to the system, and ewes were
allowed to graze the wheat crop when feed on offer reached 850 kg DM/ha and before GS31.

 A series of experiments started in late 1970'S to the earlier 1980 on very acidic yelllow sands that are deficient in Mo.  

Yellow  acidic sandy earths with  soil pH (CaCl2) of <4.5. Mo trioxide at nil, 140 & 280 g/ha was applied on original nil Mo plots.

Summary of the Mo on very acidic yellow soils:

 With ammonium nitrate the recommended rate of Mo (140 g Mo trioxide) was  inadequate for wheat grain 2 -3 years later.. 

Mo effectiveness rapidly declines with 2 to 3 years after the application.

A general conclusion for this experimental series:_  The residual effectiveness of Mo for cereal is likely to vary widely in different situations depending on soil pH, soil content of free iron, aluminium and manganese and the rate and type of nitrogen fertliser applied to the crop.

Critical Mo concentratin in wheat YEB s appeared to be 0.03 - 0.06 mg/kg. The evaluation of Mo in the YEB as a reliable tissue test but suggested continuing testing into future years.

 

 A experiment started in 1965 on acidic yelllow sands that are deficient in Mo.  

Yellow  sandy earths with  soil pH (CaCl2) of <4.5. Mo trioxide at nil, 140 & 280 g/ha was applied in 1965

Mo application of 1965 continued to supply Mo to the 1980 wheat crop, but with only about one-tenth the effect of the 1980. Ammonium sulfate depressed Mo uptake ; sodium nitrate enhanced uptake. With ammonium sulfate the recommended rate of Mo (140 g Mo trioxide) in 1965 appeared inadequate for wheat 15 years later.. 

Critical Mo concentratin in wheat YEB s appeared to be 0.03 - 0.05 mg/kg. The evaluation of Mo in the YEB as a reliable tissue test but suggested continuing testing into future years.

 

• UAV imagery with skilled specialist analysis and programs has the potential to identify and map weed issues in paddocks.
• Grass weed patches are easier to identify in legume and pasture crops than cereal crops.
• Variability in germination and crop growth makes it harder to identify grass weed areas.
• Data capture and analysis for analytical purposes such as grass weed mapping in individual paddocks will be beyond the skills of most farm businesses unless farmers have a special interest in this area.
• Group A resistant barley grass has once again been detected at the Minnipa Agricultural Centre. Barley grass resistance to Group A herbicides has been detected three times in three years, so be aware it is present current farming systems.

• Powdery mildew severity at the WMG field site, maximum of only 7% leaf area affected on Baudin, did not allow differences between varieties to be seen, other than VS and S types (Baudin, Stirling, Vlamingh, Gairdner)
• Laboratory seedling tests indicate that some of the genes postulated to provide resistance to powdery mildew in some commercial barley varieties may be compromised by some powdery mildew isolates.
• Field screening of these varieties has shown that local differences in variety responses can occur but no widespread regional variation, or ‘breakdown’ in the field resistance of varieties to powdery mildew was observed in 2013.
• The field response of commonly grown varieties at the WMG site and across the seven trials generally reflected the resistance rankings published in variety guides.
• The differences identified in 2013 were of minor impact, or occurred in non-commercially relevant varieties, however they indicate that regional differences in variety response are possible due to variability within the pathogen population and continued monitoring is important to facilitate appropriate disease risk assessment and in-crop management.
•  

• Sclerotinia stem rot is a very sporadic disease in southern NSW. Variations in the level of disease can occur between districts, between years and between paddocks.
• The best indicators of a high Sclerotinia risk district are a high intensity of canola production, frequent development of Sclerotinia stem rot (e.g. every year) and reliable spring rainfall during flowering.
• Results indicate that prolonged (at least 48 hours) durations of relative humidity above 95% can trigger Sclerotinia stem rot development.
• A high level of petal infestation with Sclerotinia ascospores does not guarantee that stem rot will develop.

• In 2018 and 2019 Sothis increased soil levels of the root lesion nematode P.neglectus when compared to chemical fallow trial strips.
• During the 2020 season Rhizoctonia levels increased from zero to high risk levels in oats with Sothis germinating underneath.
• Monitoring of soilborne diseases through different rotations and seasons helps increase understanding of the impact on our farming systems

• At both Corowa, NSW and Dookie, Victoria, there were significant yield responses to applied nitrogen (N), with maximum yields of 6.25t/ha at Corowa and 6.21t/ha at Dookie.
• Both sites gave identical unfertilised yields, averaging 4.67t/ha.
• Yield responses were associated with significantly higher dry matter (DM) production and greater nitrogen offtake when 120kg N/ha was applied at both sites.
• The maximum nitrogen offtake in the unfertilised crops at both sites equated to about 70–80kg N/ha, which was similar to the 95kg N/ha available to the crop at the start of the season at Corowa and the 65kg N/ha available at the start of the season at Dookie.
• The normalised difference vegetation index (NDVI) response index (NDVI of fertilised:NDVI of unfertilised plots equal to 1.17) was measured at third node stage (GS33) and equated to maximum measured yield responses of 1.5–1.6t/ha to applied nitrogen.
• Applying an extra 60kg N/ha on top of the initial 60kg N/ha at Corowa (total 120kg N/ha) produced an average yield increase of 0.17t/ha (maximum 0.25t/ha), which was not cost effective (data not shown).
• At Dookie in 2016 applying 120kg N/ha gave greater returns and was economically worthwhile based on an extra 0.64t/ha for the additional 60kg N/ha applied (data not shown).

• Two first-wheat trials sown early-mid May showed significant increases in yield where nitrogen was applied. However, the timing of nitrogen application or whether the nitrogen was applied as a single or split application, gave no difference in yield.
• Normalised difference vegetation index (NDVI) assessments showed no difference in crop reflectance (crop canopy greeness) due to timing of nitrogen application. However, there were NDVI differences due to the rates of nitrogen applied at the key growth stages (GS31 and GS33) where additonal nitrogen could still be applied to the crop to assist in reaching yield potential.
• Nitrogen timing had no effect on tiller and head numbers; however, a split application produced a taller crop canopy.
• Higher rates of nitrogen produced more dry matter (DM) and increased plant uptake of nitrogen, but the timing of application did not affect DM and nitrogen uptake.

• Monza efficacy on brome grass has not been reduced by the addition of these herbicides and insecticides at the final assessment.
• Some of the treatments were significantly different at the early timing, but the final assessment showed no significant difference.
• Crop phytotoxicity and crop yield were not measured.

• The last application of nitrogen was applied on the 20th July. At this stage Yield Prophet indicated that to meet full potential an application of nitrogen was required. The plant available water (PAW) was 37mm at this time giving us approximately 30 days before the crop became moisture stressed. This gave us confidence to apply nitrogen knowing that the crop would continue to grow well for 30 days even without rain.
• This site was very responsive to Flexi-N. Three applications (banded, Z13, and Z30) of 40 L/ha Flexi-N in creased yield from 1.8 t/ha to 3.2 t/ha. The nitrogen use efficiency from applied Flexi-N was 27 kg grain/kg N.
• There were early responses to 85 kg/ha Agstar before N supply became limiting.
• Plant tests in July indicated that molybdenum (Mo) was deficient (as low as 68 ug/kg with 85 kg/ha Agstar Extra), so 100 g/ha sodium molybdate was applied across the trial.
• Grain protein was low (8 to 9%) due to yield dilution. Grain tests showed marginal sulphur (S) concentrations (average 0.10 mg/kg) which may have been detrimental to baking quality characteristics such as dough strength and extensibility.

• The trial at Morawa compared a canola-wheat sequence to a wheat-on-wheat sequence with either high or low input levels. Low input had lower fertiliser, lower seed density and cheaper herbicide options. We also incorporated a comparison of a very early wheat cultivar (Zippy) to a medium maturity cultivar (Wyalkatchem).
• Water use by the crop was estimated from the sum of the in-season rainfall and the change in soil water between sowing and harvest. By estimating the amount of soil evaporation as one third of in-season rainfall, we determined the amount of water used by the plant as transpiration. The ratio of crop yield to transpiration is the transpiration efficiency of the crop which has a potential of around 20-22 mm/kg/ha.
• The yield of Zippy was more stable than that of Wyalkatchem, but the earlier maturity resulted in a substantial yield penalty. Zippy yielded around 2 t/ha each year whereas Wyalkatchem responded more in better years. The yield penalty associated with the earlier maturing variety was not offset by the higher input level. Higher input actually increased the variability in annual gross margins.
• So far Wyalkatchem has a substantially greater cumulative gross margin than Zippy and there is little difference between the high and low input strategies.

• The trial at Morawa compared a canola-wheat sequence to a wheat-on-wheat sequence with either high or low input levels. Low input had lower fertiliser, lower seed density and cheaper herbicide options. We also incorporated a comparison of a very early wheat cultivar (Zippy) to a medium maturity cultivar (Wyalkatchem).
• Water use by the crop was estimated from the sum of the in-season rainfall and the change in soil water between sowing and harvest. By estimating the amount of soil evaporation as one third of in-season rainfall, we determined the amount of water used by the plant as transpiration. The ratio of crop yield to transpiration is the transpiration efficiency of the crop which has a potential of around 20-22 mm/kg/ha.
• The yield of Zippy was more stable than that of Wyalkatchem, but the earlier maturity resulted in a substantial yield penalty. Zippy yielded around 2 t/ha each year whereas Wyalkatchem responded more in better years. The yield penalty associated with the earlier maturing variety was not offset by the higher input level. Higher input actually increased the variability in annual gross margins.
• So far Wyalkatchem has a substantially greater cumulative gross margin than Zippy and there is little difference between the high and low input strategies.

• Magenta and Baudin barley were the most competitive cultivars at Eradu, reducing ryegrass seed set by 65% compared to Wyalkatchem.  UA40 reduced ryegrass seed set by 51% which was a similar result to UA47, Mace and Bonnie Rock.  Leaf disease in UA47 reduced its competitive ability.  The cultivar UA39 is a very tall variety, and visually it appeared to significantly compete with ryegrass.  However, tiller counts and biomass measurements reveal that this cultivar is not as competitive as it appears. 
• While the UA cultivars may be useful as germplasm for future breeding programs, perhaps the most significant aspect of this research is the competitive ability of currently available cultivars.  Magenta is a high yielding, competitive wheat variety that is a useful tool for weedy paddocks.  Baudin Barley was very high yielding at Eradu and also very competitive with weeds.  This weed competition of barley is consistent with past research.  Future research will focus on ribbon / twin row seeding of competitive cultivars at higher seeding rates to maximise yield, profit and weed suppression.

Crop topping timing and delayed harvest timing can reduce faba bean seed quality.
 

• The high level of grain yield response to soil inversion is very exciting.  However, some sites have had little or no yield response while others have achieved an excellent yield response.  The key to the future success of this technique is to improve our ability to pick responsive soil types to maximise the return on investment in this technology.
• The very high level of weed control, which in some cases has been maintained for two to three years, is also very exciting.  There is no doubt that a mouldboard plough has enormous potential to decimate a weed seed bank.  However, it is imperative that the plough is set up correctly to achieve good weed seed burial.  The Smart CV site is a good example of how it can go wrong.  This site was ploughed in a rush during seeding in 2010 with a tractor that was not ideally suited to the plough (ie. not enough horsepower).  Consequently, full soil inversion did not occur and many wild radish weed seeds were left in the topsoil.  The grower knew this at the time but persisted with the trial to test the potential of the plough.  This soil is extremely non-wetting and a very big yield response was achieved. 
• The Brennan site was established in 2009 at West Moora by Dave Gartner (AgLime) using the DAFWA three furrow plough to assess the potential for lime burial with a mouldboard plough.  The site is deep yellow sand with moderate to high water repellence (water droplet penetration time 180 seconds).  Treatment with the mouldboard plough corrected the water repellence (water droplet penetration time 0 seconds).  The site was sown to wheat in 2009 and canola in 2010.  Large yield responses were measured in both years.  As yet there has been no response to lime.
• In summary, all of the growers that have purchased mouldboard ploughs have been very happy with the performance of ploughed paddocks in 2010.  Using a plough to invert the soil of a sandy, poor performing paddock every 10 to 15 years appears to be a fast, effective and economical way of renovating a paddock back to a point of high production.  Of course this machinery will have its limitations and is not a universal panacea.  However, our early studies are very encouraging.  Research into this area is ongoing and will eventually answer some of the long term questions that continue to arise.
•  
• Some of the practicalities
• Most of the growers so far have accessed machinery directly from Europe and then shipped it to Australia in sea containers.  Some growers have purchased second hand ploughs for $30,000 to $50,000. These machines have been completely dissembled and cleaned to meet quarantine standards so there are many hours of assembly work involved.  Some growers have accessed new machines for $90,000 to $130,000 for 9 to 14 furrow machines.  The cheaper machines have sheer bolt break out while the more expensive machines have hydraulic break out.  Sheer bolt machines have their limitations when it comes to rocks and stumps but have performed well nonetheless.  All ploughs imported so far are reversible and so are suited to up and back ploughing.
• A fourteen furrow machine can be set to cut 5.5 to 7 metres.  They work to a depth of 30 to 35 cm at 8 to 10 kph.  So the large machines can plough 4.5 to 7 hectares per hour at a cost of $70 to $100 / hectare (these are figures from growers).  The power requirement is 30 to 35 hp per furrow depending on soil conditions and working depth.  In good conditions a 450 hp 4WD wheel tractor can pull a 14 furrow plough but it will struggle in low soil moisture conditions.  4WD tractors often have the problem of the wide dual wheels running over the furrow which affects the depth and form of the first furrow.  Track tractors are preferred for pulling large ploughs.
• The large ploughs (12 to 14 furrow) have mainly been set up with a tool carrier that allows them to be connected to a large tractor without three point linkage.  This allows the tractor to run on level ground.  The smaller ploughs (8 to 11 furrow) are typically pulled by front wheel assist tractors in the 300 to 350 hp range with three point linkage.  In this situation, one wheel of the tractor runs in the furrow.
• There is clearly a large wind erosion risk immediately after ploughing.  Paddocks should be sown to wheat for cover immediately after ploughing (preferably the same day).  Wheat is more acid tolerant than barley and in many cases a profitable crop can be grown in the year of ploughing.  Cereals are more tolerant to sand blasting than broadleaf crops and so are the obvious choice as a cover crop.  Pay careful attention to seeding depth as it is easy to sow deep into soft soil.  Rolling of the paddock is essential after ploughing unless your hobby is towing tractors out of bogs.  Some growers are spreading seed / fertiliser and then rolling with coil packers to establish the wheat cover crop.  Relatively light rolling (eg. coil packers) is all that is necessary to firm the top 5 to 10cm of soil after ploughing.

This is the 3rd wheat crop where there has been no benefit in yield or quality due to mouldboard ploughing.

 

The highest yield in the trial was produced by the 2012 Mouldboarding treatment (1st crop) and the yield advantage dropped off for the second crop (2011 mouldboard treatment)

• No stand out varieties with peas at Mt Cooper in 2009.
• Av-Garnet conventional variety yielded the best at Mt Cooper followed by the two Clearfield varieties, Hyola 571CL and 43C80.

Prosaro Fungicide was the best option for reducing Sclerotinia disease pressure during the season. The treatments were applied at 50% Flowering, before any petal drop had occurred. The return on investment was still very good, with Pro-saro returning an additional $116/ha above the untreated control. Perhaps a larger response to fungicides would have been evident if the sprays had been applied at 20-30% flowering, as infection was very evident before spraying. The Rovral fungicide treatment was disappointing in this trial.

• Weed sensing and selective spot spraying with machinery such as the WEEDSEEKER and WEED-IT selective spot sprayers has allowed for very cost effective broadacre spot spraying of weeds without spraying the whole pad-dock area.
• Selective spot spraying of hard to kill summer weeds is one application where this technology has a potential to save growers significant funds usually allocated to herbicides.
• Elevated rates of non-traditional or previously cost prohibited herbicides of a different resistance group can now be used to achieve much more reliable and faster control of weeds.
• Alliance, Gramoxone, Basta, Roundup Powermax and Ally provided acceptable levels of control on large Roly Poly at high rates suitable for selective spot spraying.
• Hammer and Sharpen did not provide acceptable control of Roly Poly after initial impressive weed burndown.
• Roundup Powermax, Garlon, Grazon, Kamba 500 and Tordon 75D all provided excellent Afghan Melon control.
• Grazon, Kamba 500 and Tordon 75D caused herbicide toxicity issues in the wheat crop as per trial report.

• Weed sensing and selective spot spraying with machinery such as the WEEDSEEKER and WEED-IT selective spot sprayers has allowed for very cost effective broadacre spot spraying of weeds without spraying the whole pad-dock area.
• Selective spot spraying of hard to kill summer weeds is one application where this technology has a potential to save growers significant funds usually allocated to herbicides.
• Elevated rates of non-traditional or previously cost prohibited herbicides of a different resistance group can now be used to achieve much more reliable and faster control of weeds.
• Alliance, Gramoxone, Basta, Roundup Powermax and Ally provided acceptable levels of control on large Roly Poly at high rates suitable for selective spot spraying.
• Hammer and Sharpen did not provide acceptable control of Roly Poly after initial impressive weed burndown.
• Roundup Powermax, Garlon, Grazon, Kamba 500 and Tordon 75D all provided excellent Afghan Melon control.
• Grazon, Kamba 500 and Tordon 75D caused herbicide toxicity issues in the wheat crop as per trial report.

• Weed sensing and selective spot spraying with machinery such as the WEEDSEEKER and WEED-IT selective spot sprayers has allowed for very cost effective broadacre spot spraying of weeds without spraying the whole pad-dock area.
• Selective spot spraying of hard to kill summer weeds is one application where this technology has a potential to save growers significant funds usually allocated to herbicides.
• Elevated rates of non-traditional or previously cost prohibited herbicides of a different resistance group can now be used to achieve much more reliable and faster control of weeds.
• Alliance, Gramoxone, Basta, Roundup Powermax and Ally provided acceptable levels of control on large Roly Poly at high rates suitable for selective spot spraying.
• Hammer and Sharpen did not provide acceptable control of Roly Poly after initial impressive weed burndown.
• Roundup Powermax, Garlon, Grazon, Kamba 500 and Tordon 75D all provided excellent Afghan Melon control.
• Grazon, Kamba 500 and Tordon 75D caused herbicide toxicity issues in the wheat crop as per trial report.

• The moisture results indicate that canola uses more water at a greater depth than wheat. There is less water remaining in the soil profile below 40cm under canola sown at 1 and 6 kg/ha than for the same depth under wheat. There will be less moisture accessible to a wheat crop in 2012 on the canola plots than on the fallow plots.
• The use of fallow for moisture storage alone is unlikely given the volume of stored soil moisture at the beginning of May 2011. Indications for the use of a break crop were positive from early April. Summer rainfall had refilled the soil profile, fol-lowing the wheat of 2010, giving some surety to crop yield. Only a small rainfall event was required to break the season and join the soil moisture fronts.
• Season length and consistent rainfall has favoured yield of canola regardless of its plant density. A very plastic species as the yield from 22 plants/m2 is only 200 kg/ha less than that from 68 plants/m2. The canola plots received all required inputs as a result was a more expensive crop to grow than either the wheat or fallow.

• ATR Stringray was the highest yielding variety, even though it showed the least crop canopy and vigour of all varieties tested. This trait suggests it puts more resources into grain production than into crop biomass and leaf area.
• The TT hybrid varieties exhibited the greatest leaf biomass and canopy closure by 21st July. However, due to a higher than ideal plant density, this heavier crop canopy did not translate into higher grain production.
• The 2 new varieties from Nuseed – Stingray and Snapper, were the most profitable varieties in this trial and may re-place areas of Cobbler plantings in the future.

• The season was characterized by above average rainfall conditions which provided good growing conditions for crops and also ideal conditions for weed establishment, particularly medic which was difficult to control at the site and may have masked variety differences from crop topping application timings in the trial.
• Crop topping lentils 10 days prior to the recommended ARG milky dough stage led to a significant (>50 %) yield loss when compared to the respective Nil treatments across all lentil varieties. This indicates that correct timing of this practice in critical in this crop and may be difficult to achieve in long favorable growing seasons like 2016.
• Grain yield of lentil varieties was affected similarly across the crop top timings in 2016. This conflicted with previous findings, which had shown that varieties like PBA Blitz were better suited to this practice, and highlights the large effect seasonal conditions have on this agronomic practice in lentil. Further varietal development work is required in lentil before the industry has a robust variety which is well suited to effective crop topping of ARG across environments and seasons.
• All varieties of field peas showed a high level of adaption to the agronomic practice of crop topping in the long and favorable season of 2016 which is consistent with previous findings in this crop (Southern Pulse Agronomy Results Summary, 2015)
• A significant grain yield loss was observed from crop topping chickpeas 10 days earlier and at the recommended ARG milky dough stage highlighting the poor relative suitability of this crop to the agronomic practice of crop topping. PBA has developed early maturing chickpea varieties which may be better suited to crop topping in some environments and seasons. Further evaluation is required with these lines as the ability to reduce ARG seed set in this highly uncompetitive crop is essential for its continued uptake in southern farming systems.

• The 2016 season saw higher yields than the previous two seasons in field pea, lentil and faba bean. Chickpeas however performed better at Minnipa in 2014 due to adequate rainfall during the growing season and warmer temperatures during critical flower and pod fill stages. A virulence change in the ascochyta blight (AB) pathogen in southern Australia now means that all current chickpea varieties are rated as either susceptible or moderately susceptible. Although often relatively lower yielding in low rainfall regions, moderately susceptible varieties GenesisTM090 and PBA Slasher will have a reduced production risk and require fewer fungicides than the higher yielding susceptible varieties such as PBA Striker. Chickpeas are generally less suited than other pulse options in many cropping regions in SA due to their relatively late maturity and increased sensitivity to cold temperatures during the flowering and pod filling phase.

• Crop species were blocked and not randomized for ease of management and this experiment was only aimed at obtaining a general understanding of rhizoctonia susceptibility in different crop species. As such results will require careful interpretation and crops cannot statistically be compared with each other. Only comparisons between varieties and treatments within a crop species can be statistically compared.
• Results do however indicate a trend in increased susceptibility of some crops and varieties to Rhizoctonia than others with faba beans appearing to show a reduced ability to decrease rhizotonia levels when compared with the other crop species. This finding backed up field observations throughout the year for both crop growth and root health.
• Further work is required in this area to understand if pulse crops vary in their ability to offer a ‘break crop’ benefit in terms of rhizoctonia root disease levels to the following cereal crops..
• Initial results also suggest variety variability for reducing or hosting rhizoctonia in pulses may exist and also requires further understanding.
• An improved field screening methodology is required to achieve the above due to the patchy and random nature of this disease in the soils of SA. An associated project by SARDI root diagnostics group is underway to try and develop such a methodology.

1. Mungbean did not respond to nitrogen fertiliser with a 1 t/ha yield and a starting soil nitrogen of ~90 kg N/ha.

2. Mungbean has limited ability to maintain its water balance in high evaporative conditions. Timely in-crop rainfall/irrigation may still not maximize yields under very hot conditions during flowering to pod fill.

3. Irrigation decreased canopy temperatures by up to 8°C. 4. Charcoal rot levels increased, with the greatest rise occurring in the irrigated trial.

• There were no significant yield differences in this trial with all of the new chickpea lines producing equivalent yields to Kaniva under low disease pressure.
• Flip94-509C and Flip94-508C were very dark in colour compared to Flip94-090C and Kaniva.
• Improved ascochyta resistance will make management of these new varieties a lot easier than over the past five years, however quality and marketing will be the key to profitability with many of Australia’s markets for desi chickpeas now supplied by alternative sources.

The theoretical N contribution from faba stubbles is 20 kg N/tonne of stubble. However this assumes all residue is mineralised. 

Stubble retained on the soil surface is broken down more slowly than residues present in the soil.

A 6 t/ha bean crop resulted in approximately 140 kg N/ha being released for the following season. 

• The waterlogging event affected all treatments, such that both the chlorophyll content index (CCCI) and normalised difference red edge (NDRE) were similar for all treatments immediately after the water-logging event.
• The topdressed treatments recovered better after the waterlogging event than the mid-row banding (MRB) treatments.
• MRB showed an acceptable yield and apparent nitrogen recovery efficiency (ANRE) in both waterlogged and non-waterlogged conditions, but similar or less than N topdressing treatments. The topdressing treatments had surprisingly high ANRE.
• The mid-row banded nitrogen declined during the season, presumably with nitrification and uptake. Some mid-row banded nitrogen was still evident 131 days after sowing.
• The majority of the mid-row banded nitrogen was present as ammonium during the season, which allowed it survive the waterlogging event

• Unfortunately, crop was only sown at 40kg/ha, half the intended seeding rate. Low seeding rate and sever sub-soil compactions resulted in relatively low yields.
• There were only low levels of yellow leaf diseases.
• The site responded to N and K. With fungicide applied, there was a 0.7t/ha response to 85 kg N/ha (trt 3 v 4), and a 0.5t/ha response to 68kg K/ha (trt 2v9).
• There was a significant response to fungicide at the high rate of N, but only with K applied. This suggests the benefits of fungicide are greatest where nutrient deficiencies are overcome.
• Hectolitre weights were 74-77 kg/l and screening less than 5%
•  

• There was a strong response to P but no response to N
• Plant tests showed that the crop was unlikely to respond to N
• 0N 24P was nearly $300/ha more profitable than 80N 16P!
• Profitability is driven by getting the N and P balance AND application rates right.

• Good growing conditions produced wheat yields of up to 5.0t/ha and canola yields of up to 2.6t/ha.
• There was no response to P in either crop where N was applied.

Only medic based systems from 2008 and 2009 resulted in higher wheat yields in 2011.

• Growers need to be aware that glyphosate, trifluralin and diflufenican residues, plus the glyphosate metabolite AMPA, can accumulate to agronomically significant levels in certain soils.
• These findings suggest that the current risk of damage to crops in NSW is minor compared with some sites in WA that have lower rainfall and sandy soils with low organic matter.
• The risk to soil biological processes is generally minor when herbicides are used at label rates and given sufficient time to dissipate before re-application.
• However, given the frequency of glyphosate application and the persistence of trifluralin and diflufenican, further research is needed to define site-specific critical thresholds for these chemicals to avoid potential negative effects on soil function and crop production.

• Natrakelp applied to the foliage showed no yield advantage in any of the crop types.
• At this stage this product needs further evaluation before it is widely used.

The results confirm some suspicions of some observant farmers that a small amount of compaction, or 'firming' can be beneficial to crop yield.