Linseed is not new to Western Australia or the Great Southern region as it was grown in the Boyup Brook region from the 1940’s to the 1960’s. It was grown for fibre and milled at the Boyup Brook Flax Mill. Linseed (flax) Linum usitatissimum is a niche product and has the potential to offer an alternative revenue steam for producers outside of the traditional crop. Demand for Linseed has recently shifted to a health food. Linseed has several uses, it can be crushed for Linseed oil which is a rich source of linolic acid and Omega 3 fatty acid and the remaining linseed meal can then be used as livestock feed or it can also be eaten as a whole seed or ground.

Linseed also has agronomic benefits as a potential break crop that provides a disease break, the opportunity for alternative weed management strategies, provides an insect pest break and can be effective in reducing some soil borne root diseases and soil borne pathogens namely root lesion nematodes. Canadian research has demonstrated that cereal yields were higher when planted on linseed stubble compared to wheat stubble.

The aim of the project is to investigate agronomic packages which support the introduction and scale up of commercial cultivation of Linseed in the Great Southern region of Western Australia.

Consistent supply with volume is imperative to develop a market that has the ability to realise the full value of Linseed produced. Also, in order for growers to take up production it is important they have a full agronomic package available to grow the crop successfully. Finally, Linseed needs to generate an equivalent return per hectare of alternative rotational crops such as canola in order to expand into the rotation.

The key objectives of this project are:  

A: To determine if Linseed can be successfully grown under dryland farming conditions in the Great Southern region of Western Australia with the potential to scale up to commercial cultivation.

B: To determine if any investment is required into machinery and infrastructure by growers to grow linseed.

C: To develop basic agronomic guidelines to grow linseed in WA.

D: To assess the yield potential of two commercially available linseed varieties grown under dryland conditions in WA, Croxton and Bilton.

The project was conducted over two years in 2019 and 2020. In 2019 the trials were conducted in small plots across three sites. In 2020 the trials were conducted as producer demonstration sites utilising grower machinery and large-scale plots.

In 2019 three sites were located across the Great Southern Region of Western Australia covering a variety of soil types, climates, paddock histories and growing conditions. The trials sites were in the shires of Darkan, Wagin and Kojonup. The trials involved growing two commercially available varieties Croxton and Glenelg over three times of sowing (TOS) 10 to 14 days apart at three seeding rates (SR): 35, 40 and 45 kg/ha and applying three top dressed nitrogen application rates (low, optimal and high) 40, 80 and 120 units N/ha.

Over the three trial sites, the seeding rates and nitrogen application rates trialed did not consistently result in significant differences in grain yield or oil quantity and quality. Time of sowing had the greatest impact, with the earliest time of sowing generally resulting in higher grain yields. Glenelg on average had a higher grain yield and oil quantity, with Croxton having the highest oil quality.

Trial Site

Average Site Yield

t/ha

Darkan

0.562

Wagin

0.914

Kojonup

0.998

Table 1: Average Site Yields in 2019 (Below average rainfall)

The Darkan site plant counts were the highest, however this was not reflected in the yield. Darkan was the lowest yielding of the three sites. This may be due to the below average rainfall and lack of finishing rains experienced on the non-wetting forest gravel soils at this trial site. Kojonup and Wagin on average achieved nearly double the yield of the Darkan site despite lower plant counts and early plant disease.

In 2020 four demonstration/bulk up sites were established across the Great Southern Region covering a range of soil types, rainfall, rotations and growing conditions. The four sites were located in Katanning, Wagin, Darkan and Kojonup.

The methodology in the second year of the project was to bulk up the Linseed seed for future commercial production and to also integrate high level variety comparisons between the two varieties being utilized in the project Bilton and Croxton. Two sites, Wagin and Darkan, incorporated replicated plot treatments as a variety trial with the other 2 sites being predominantly bulk up sites.

The key outcome of any variety demonstration is the final yield result. Due to operational difficulties within the demonstration some yield data is not available however the key findings from the data available was:

• Bilton yielded on average 0.95 MT/Ha and 85% of Canola
• Croxton yielded on average 0.86 MT/Ha and 72% of Canola.
• Bilton out yielded Croxton on both sites.

The seasonal conditions may have contributed to Bilton out yielding Croxton. Bilton is a slightly shorter maturing variety and the below average rainfall received in 2020 is expected to have favoured shorter season varieties.

The project has successfully set in the place the ability for growers in the Great Southern region to scale up production of Linseed and demonstrated its ability to fit within the current rotations with the additional benefit of assisting in the long-term management of soil borne root pathogens.

However, for the scale up of the commercial cultivation of Linseed there is the requirement for beyond farm gate systems to be in place before producers will scale up production. An active market to determine a fair price, storage and handling facilities off farm to enable harvested grain to be stored before delivery to consumers, supply chains in place which enable efficient delivery of the grain anywhere around the world and long-term buyers/processors who will receive the grain year in year out. There is still a lot of process to be put in place before Linseed production will scale up to a considerable level.          

Grower adoption beyond the project has continued with over 60 Ha planted in southern WA in 2021 across 4 growers. Confidence in the supply chain beyond the farm gate remains as the major obstacle stopping increased uptake and requires addressing before increased production can be expected.

Bannister had the highest grain yields with 9.00 t/ha.

Grazing did impact on yield in Bannister, but not Durack or Yallara.

Additional N above the control did not increase grain yields. Based on the trial results, Bannister nitrogen requirement was 25 kg N/t, whereas Yallara and Durack required 35 kg N/t.

Dry matter harvested (simulated grazing) at around GS31 ranged between 0.81 and 0.99 t/ha (NS)

Wimmera had the greatest yield loss in the presence of weeds and produced the highest weed yield. Hindmarsh also produced the same weed yield. Both of these varieties should not be sown into weedy paddocks unless there is a good management strategy. Scope, Buloke and Compass were identified as very competitive varieties, with the least amount of yield loss and weed seed production. Generally, the presence of weeds reduced barley yields by 1.4t/ha on a 5.4t/ha crop (mean of all varieties).

• Two lontrel resistant biotypes have been identified in overseas vetch populations.
• Risk of resistance in Australian farming systems is low, but management practices to avoid lontrel resistant vetch should be implemented.
• Be more wary of wild vetch populations as opposed to volunteer vetch.

Yield loss of 0.1-0.5t/ha was observed in some SFNB susceptible varieties at Horsham that had two fungicide applications. The Quambatook site suffered significant yield loss but this was due to a combination of SFNB and an additional factor (possibly crown rot). It is unlikely that a single application of foliar fungicide would have provided effective control of SFNB and prevented yield loss if applied after GS39 or to MS or better rated varieties.

Zinc needs to be applied as part of the fertiliser program every three to four years in the Wimmera and Mallee. The use of zinc as a seed dressing or foliar application will only be beneficial when the paddock has had a poor zinc history. In trials at the Rupanyup site where zinc had been applied 2 out of the last 5 years there were no yield benefits of adding more zinc even to responsive crops such as faba beans and lentils.

• JumpStart is phosphate inoculant containing naturally occurring soil fungi
• Trial showed no significant difference in JumpStart treatments
• Significant yield increases achieved with increasing phosphorus rates
• DGT test results suggest JumpStart increases plant available P residual for following crop

• Summer weed control is not a luxury item and should be considered an essential expense.
• The financial reward of timely summer weed control far outweighs the outlay and this was again proven in 2006.
• Expenditure on summer weed control can be minimised if weeds are sprayed early.

The use of a Speed tiller to incorporate stubble did not appear to have any negative impacts in the mixed farming systems in the medium rainfall zone in the South-East of South Australia in a very dry season. There was high paddock variability, due to moisture stress, which would have impacted the results.

KI’s 7 golden rules for successful establishment

•  Good weed control is absolutely critical – it’s a waste of time seeding if you don’t get weed kill.
•  Apply broad spectrum insecticides pre-seeding.
• Seed in early Spring.
•  Seed at 2kg/ha.
•  Ensure good seed soil contact.
•  Allow the plants to become well established before grazing.
•  Continually monitor the paddock, after seeding for insects and pests and during the first graze to ensure stock are not pulling up runners.

• Kikuyu has the potential to become a valuable addition to pasture mixes on parts of KI
• Kikuyu may provide many economic as well as environmental benefits
• Early spring sowing plus weed and insect control is essential for successful establishment (and the odd rain dance won’t go astray either!)
• Kikuyu is less likely to become an environmental weed if the adjacent native vegetation is fenced and is in good condition.

• Kikuyu has the potential to become a valuable addition to pasture mixes on parts of KI.
• Follow the nine golden rules for success – weed, insect and vermin control, good seed/soil contact, shallow seed at 2kg/ha in spring, don’t graze until well established, use N fertiliser or legumes.

• Weed control is essential for effective kikuyu establishment.
• Two sprays of round up is the ‘safest’ bet although you do lose some grazing value and may have difficulties with seeding at the optimum time if the paddock is too wet to spray early.
• Further work is required to quantify the benefits of application of TM 21 on kikuyu pastures on KI.

• Weed control is essential for effective kikuyu establishment.
• Two sprays of round up is the ‘safest’ bet although you do lose some grazing value and may have difficulties with seeding at the optimum time if the paddock is too wet to spray early.
• Further work is required to quantify the benefits of application of TM 21 on kikuyu pastures on KI.

• 2015 - Plots with-out lime were consistently lower yeilding than plots with lime irrespective of incorporation treatment. Threatments with incorporation tended to have higher yield than where lime is left on the surface.
• 2014 - sowing setup remains the weakest link when using deep tillage. Depth of sowing is critical and fifficult to control on ameliorated soils. A good establishment density is critcal for reducing erosion potential at both ends of the season.

This demonstration investigated knockdown weed control options prior to sowing. For the knockdown control of ryegrass, canola and wild radish prior to sowing, glyphosate is quite effective and no additional herbicides are generally required. Glyphosate is weak on marshmallow and a group G herbicide is required as a mix with the glyphosate. To reduce the risk of group M (glyphosate) resistance developing in ryegrass it is strongly recommended to use the ‘double knock’ approach (glyphosate followed four to seven days later by SpraySeed®) on at least some paddocks every year.

• It is no longer a question of whether ryegrass will become resistant; it is when! 
• Double knock was the most effective treatment for managing this ryegrass population  (98% control).
• Alternative crop options should be integrated into the rotation to manage weeds and reduce the reliance of glyphosate. 
• High water rates, spraying closer to evening and no later than 7-10 days after the initial knockdown are essential when using Paraquat.

• Following drought affected cereals, labile P concentration was greater in the crop row than in the inter row.
• There is potential to exploit carry over P following 2006.
• In addition this may also have implications for those with auto steer systems with 2cm accuracy to seed into higher concentration of P in last years failed or low yielding crops.

Late (Z39+) application of N resulted in yield and protein increase over the control.

Crop yields were dissapointing due to the frost in late October.

Key points to be taken from this trial are, ensure early sprays are applied when Wheat Leaf Rust is detected. All fungicide treatment with an early treatment resulted in a significant yield benefit. it is important to take into consideration the cost of any particular fungicide treatment and the potential yield response.

In the post emergent treatments a range of herbicides produced very good control of all oilseed and legume crops included.

• In the post-emergent treatments a range of herbicides produced very good control of all oilseed and legume crops included.

• In the post emergent treatments, a range of herbicides produced very good control of all oilseed and legume crops included.

• In the post emergent treatments a range of herbicides produced very good control of all oilseed and legume crops included.
• Lucerne was significantly damaged by almost all herbicides applied.

• Simazine and metribuzin produced more crop effect compared to normal, especially in lentils. 
• For all the PSPE application treatments 50% more product significantly increased the crop damage.
• The double knock of glyphosate followed by SpraySeed gave excellent control.

• New post emergent broadleaf herbicides Torpedo, Conclude, Precept and Velocity generally gave good control of pulses or canola.
• Pre-emergent grass herbicides had no effect on the growth of pulses or canola.

2018 Season 

• While growing season conditions were dry and grain yields were low and therefore not profitable, both Bolt lentils and Gunyah field peas yielded highest of the 5 break crop species grown at the Salmon Gums demonstration site. Soil boron levels were relatively high at this site.
• Following waterlogged conditions in August, Bonito canola out yielded the 4 four legume break crop species grown at the Gibson demonstration site, with Samira faba beans a close second.
• The addition of an extra 72 Units of nitrogen (171L Flexi-N delivered in 3 incremental applications) to the 5 break crops at the Gibson demonstration site resulted in significant increases in yield and earnings before tax profit in both Bonito canola and Samira faba beans but made little difference to the performance of PBA Strikers chickpeas, Morava vetch and Jurien lupins. The addition of extra nitrogen to Faba beans lifted yield by an average of 0.763t/ha taking it to 2.473t/ha which was close to the average yield of un-topped-up canola (2.169t/ha).
• In terms of earnings before tax, the faba bean crop was the most profitable of the 5 break crops grown at Gibson. It is important to note though that the $800/tonne price seen for faba beans in February 2018 was well above both the five and ten year average for this crop.

2019 Season 

• Annual rainfall was well below average in 2019 at all 5 demonstration sites in the Esperance Port Zone and an unprecedented frost event in September affected crop flowering at the Ravensthorpe, Salmon Gums and Beaumont sites. It’s important these seasonal conditions are factored to in to interpretation of legume crop performance at these sites.
• Poor growing conditions at the Ravensthorpe demonstration site resulted in very low yields and none of the break crops grown were profitable. The State Government declared part of the Ravensthorpe Shire as water deficient on 7th May 2019 and further parts of the Shire on 13th February 2020.
• Reasonable rainfall in August stimulated germination of broadleaf weeds resulting in a higher than ideal weed burden in all break crop species strips at the Ravensthorpe site. This highlights the limited control options available for late weed germination in legumes.
• At the Coomalbidgup demonstration site while lupins yielded highest of the break crop species grown, they were not profitable, making an EBT tax loss. Chickpeas were the only profitable break crop species grown at this site; lower seasonal rainfall meant the waterlogging conditions that commonly prevail at this location were not a constraint on chickpea yield. An average rainfall year would likely result in chickpea yield losses due to their susceptibility waterlogging.
• Dry conditions at the start of the season at Coomalbidgup reduced herbicide efficacy but the site did not have a high background broadleaf weed pressure so competition was unlikely to have greatly reduced crop yield.
• Poor growing conditions at the Beaumont demonstration site, which entailed a dry start, a severe frost at flowering and a very dry finish resulted in none of the 5 break crops grown performing profitably. The dry start at this site affected plant establishment of the chickpeas and faba beans in particular. Seeding equipment issues handling the large seed size of the faba beans also reduced establishment of the beans.
• Poor growing conditions, which entailed 2 dry preceding years resulting in very low subsoil moisture at the start of the season, a dry start, a dry growing season, a severe frost at flowering and a dry finish meant that Scepter wheat yields were below average at the Salmon Gums demonstration site. There was no significant difference in wheat yields achieved between the 2018 break crop species treatments. Scepter was profitable after each of the 2018 break crop species except in those replicates following vetch. Wheat after lentils were most profitable with an EBT return of $50/ha, followed by wheat after field peas at $34/ha.
• At the Gibson Demonstration Site wheat following vetch grown in 2018 yielded highest and was therefore the most profitable. Wheat following faba beans and lupins grown in 2018 yielded next highest; their yields being statistically similar. Wheat in replicates following 2018 canola and chickpeas were similar and yielded lowest of the 2018 break crop species treatments.
• Wheat yield in replicates that received an additional 171L/ha of Flexi N in 2018 yielded higher than those that did not and as such were more profitable.
• Tissue test data and wheat yields achieved at the Gibson site suggested nitrogen carryover from 2018 to the 2019 cropping season had occurred. This was not reflected in the pre-seeding soil test data demonstrating the significance of low soil moisture in impeding soil nitrogen mineralization. These results emphasise the importance of understanding mineralization when interpreting soil test results in dry conditions and the merits of coupling autumn soil testing with in-crop tissue or soil testing to support in-crop nutrition decisions.

Lentils are best to be used as the last legume crop in a rotation as the volunteer lentils are hard to control in other legumes.

• Growers and advisers should be vigilant in applying protective fungicide sprays in chickpea and lentil crops for ascochyta blight.
• Many current and minor use permit fungicides trialed at Hart in 2017 provided good preventative control (less than 10% of plants infected) for ascochyta blight including; chlorothalonil, Aviator Xpro, Cabrio and Captan.

• Commercial viability has been difficult to demonstrate.
• Field trials demonstrated that the H Senor was able to accurately classify annual ryegrass in several broadleaf crops, including canola, faba bean, lentil and field pea.
• Other grass weeds such as brome grass and wild oats were also correctly identified as grasses in these crops.
• Broad leaf weeds were accurately classified in cereal crops, however this was more difficult due to the overlapping nature of the cereal crops at the time when the broadleaf weeds had emerged.
• Classification accuracy was lower for detection of grass weeds in cereal crops and broadleaf weeds in broadleaf crops, and these scenarios were not pursued for that reason.  

• Most varieties yielded did not incur yield loss from crop topping at the recommended timing indicating that they were well suited to crop topping at the recommended timing for rye grass control in 2014 where the season finished rapidly due to dry conditions.
• As found in previous seasons there is not always a direct correlation between variety flowering and maturity timing and yield loss due to crop-topping.

The significant detrimental effect of P Pickle T on lentil yield was thought to be due directly to the seed treatment rather than due to a reduction in disease control.

• Early sown lentils consistently out-yielding those sown later, as the heat wave event in early
  November compromised yield of late sown lentil crops by terminating seed fill prematurely.
• The 2009 data was inconclusive in determining whether foliar fungicides for BGM control
  can be delayed until after the canopy closure stage in situations where conditions are not
  conducive for disease development at canopy closure (ie less than 10oC at night and 18oC
  during the day).
• The rapid finish to the season favoured early maturing varieties PBAFlash and CIPAL610 at
  both sites, averaging 5-32% above site means across sowing dates.
• Canopy closure sprays with follow up sprays dependent upon disease observation were
  successful in reducing BGM in all varieties tested at Paskeville, even at the early sowing
  date.

• The late break (11 June) and prevailing seasonal conditions were unfavourable for the spread of botrytis grey mould at both sites in 2005
• Traces of botrytis grey mould were found at both sites but had no impact on yield. A late season ascochyta blight outbreak did occur at Melton however control sprays may have been applied too late to induce a fungicide response.
• No significant difference was recorded between any of the different fungicide spray strategies between varieties or at different sowing times.

Soluble herbicides utilised in controlling broadleaved weeds in lentils can have significant impact on growth. Ensuring that soil throw is minimised back into the seed row is paramount. Also understand soil moisture levels prior to applying some herbicides and the impact this factor will have on uptake and persistence

Depending on nutrition demand and soil nutrient levels, foliar applied products can assist in increasing yield. Primarily in a sand loam soil at this site, Sulphur products appeared to increase yield

• Results from this experiment and previous research have proven that lentils can be successfully grown in southern NSW with sound agronomic planning and management.

• Across all varieties tested there was no significant difference between the 4 May and 20 May sowings, which validates the current sowing window recommendation from late April to mid May for the western region of southern NSW. Previous experiments have shown yield decline with a late May sowing.

• PBA Hurricane XTA, PBA Jumbo2 and PBA Bolt were the highest yielding commercial varieties, while PBA Ace was significantly lower yielding in this experiment, which is not consistent with previous research.

• There was a significant reduction in seed weight when sowing was delayed for all varieties except PBA Ace, which showed no significant effect.

• The low mean yield at this site (0.69 t/ha) was largely attributed to drought, and was exacerbated by late sowing conditions and suspected herbicide damage.
• Small yield and normalised difference vegetation index (NDVI) increases closely reflected increases in seedling density. 
• PBA Giant and PBA Jumbo2 produced more grain and green foliage cover, closely followed by PBA Ace. These ranking reflect the long term, multi environment trial (MET) yield analysis for lentil varities for this region (Figure 5).
• Care should be taken when applying and incorporating herbicides on acidic, light textured soils, particularly when straw is present. Under these conditions, it is advisable to sow deeper to position seed below the herbicide band. 
• Furher lentil sowing rate investigations are required in this region to better understand variety responses to plant density, earlier sowing, season conditions and different environments.    

• Desiccating lentil crops was critical in 2010 to minimising losses by allowing an earlier harvest, prior to the heavy rainfall events. Rainfall affected crops yielded up to 50% less.
• The earlier maturing varieties PBA Flash and PBA Blitz offer higher yields in drier years but not necessarily in long seasons such as 2010.  
• In the Mallee, PBA Blitz offers good disease resistance which improves reliability and yield and its medium large seed makes it attractive for export.
• Late in 2010 in the Mallee, disease and virus were observed. These may have resulted in higher seed infection and inoculum levels. Be prepared for higher disease and virus levels in 2011.

• Ascochyta blight- and botrytis grey mould-resistant red lentil variety, Nipper, available for higher rainfall areas.
• Green lentil, Boomer, available for farmers but must be harvested early to maximise yield and seed quality.
• Good lentil management is beneficial in most years, irrespective of rainfall.

Lentil yields were poor in 2004 due to dry conditions, mainly through October, combined with high temperatures and frost during the reproductive period. Trial data were unreliable for many sites and variety selection should be based on long term data. Disease was not a major issue in 2004 but seed from the Horsham trial site had high levels of infection by ascochyta blight and diligence must be maintained in disease management.

Note: CIPAL203 was resistant to botrytis grey mould and ascochyta blight and is suited to medium rainfall areas such as the Wimmera. CIPAL411 and CIPAL415 have improved salt tolerance. CIPAL402 is moderately resistant to botrytis grey mould and ascochyta blight and is a larger seed size than Matilda.

• Nugget has been the highest yielding variety in Victoria in long term variety comparisons.
• Botrytis grey mould and ascochyta blight are major threats to the yield and quality of the Australian lentil crop.
• Digger and Cassab have the best resistance to botrytis grey mould. Northfield is the only variety with seed resistance to ascochyta blight but it is the variety most susceptible to botrytis grey mould.
• Northfield, ILL7685 and ILL6788 are more tolerant to salinity in glasshouse studies and were the highest yielding lines at Birchip where EC levels were high.

When selecting a variety, growers also need to consider their individual farm and paddock situation and the access and availability of likely target markets and to make their selection on all available information.

Herbicide damage on crops was negligible. Grain yield of PBA Hurricane XT (1.94 t/ha) was 150 kg/ha greater than PBA Hallmark XT, at Coomandook, 2019.

•  All results need to be treated with caution, due the dry conditions, frosts and weed burden at the trial site. Similar to previous research PBA Hurricane XT showed tolerance to imidazolinone herbicides and improved tolerance compared with PBA Jumbo2 to sulfonylureas and sulfonamide herbicides. Flowering applications, as expected generally had the most significant reduction on grain yield. The improved weed control in several of the herbicide treatments meant that significant yield gains were commonly observed in the herbicide treatments. 
   

• Applications of metribuzin PSPE significantly reduced lentil establishment compared to IBS and the untreated control (see Figure 1 in attached trial report summary).  Across all varieties and sowing depths, establishment following the PSPE application was 75 plants/m2 while the IBS and untreated treatments had a plant establishment of 100 plants/m2.  Damage following PSPE application of metribuzin was particularly severe in the PBA Hurricane XT lentils.  The 4 node treatment had similar establishment to the control as the in crop herbicide treatment had not been applied at the time of the establishment assessment. 
• See attached trial report summary for further results and interpretations.

• PBA Jumbo2 showed significant herbicide damage from all the herbicide treatments except applications of up to ‘r2’ of ‘HTGpC-D’, ‘r2’ of ‘HTGpC-H’ and ‘r1’ of ‘HTGpC-F’ at the four node stage.
• The new genotype ‘LGPC’ had no significant herbicide injury from any herbicide treatment except ‘HTGpC-A’.
• Both genotypes showed the highest sensitivity to application of ‘HTGpC-A’ at the four node stage.
• Grain yield results should be interpreted with caution due to very dry seasonal conditions and yield loss in ‘LGPC’ due to seed shattering. 

• Key Messages: SP1333 and PBA Hallmark XT showed little to no signs of herbicide damage at x0.25 gai/ha and 376 gai/ha. At higher herbicide rates SP1333 showed lower herbicide damage than PBA Hallmark XT, but grain yield results were unreliable due to shattering in SP1333.

• Establishment and Plant Growth: Application of ‘Gp C’ PSPE had little or no impact on emergence and early plant growth. Lentils had optimum establishment and growth as a result of adequate soil moisture at sowing and favourable conditions during the rest of the season. Growth, development and yield were not affected by the few frost events, which occurred in the spring.

• Herbicide Damage: Both varieties did not show symptoms of herbicide damage at lower rates (x0.25 and x0.5 gai/ha) irrespective of the time of application (Table 1). However, at higher rates (x1 and x2 gai/ha) the new variety SP1333 showed less damage than PBA Hallmark XT. At x2 gai/ha, PSPE damaged SP1333 more whereas application at 4 node stage was more detrimental for PBA Hallmark XT.

• Number of weeds: Better control of weeds were achieved when ‘Gp C’ was applied as PSPE or 4 node applications at rates above x0.5 gai/ha (Table 2). Almost full weed control was seen in the x1 gai/ha and above for both PSPE and 4 node treatments. Weed densities were not different between varieties.

• Biomass at flowering: At flowering varieties were not significantly different in biomass. In PBA Hallmark XT biomass improved when low rates (x0.25 and x0.5 gai/ha) were applied as PSPE spray but decreased at the highest ‘Gp C’ rate (x2 gai/ha) applied as PSPE or 4 node stage spray, compared to the plants which did not receive herbicides (Table 3). This indicates that application of ‘Gp C’ at lower rates as PSPE sprays in PBA Hallmark XT can effectively control weeds without the crop damage or biomass loss, as oppose to higher rates. However, rates or times of herbicide application did not cause any biomass change in SP1333.

Good October rains and mild weather in spring ensured relatively high yields, especially in the Mallee, and good whole seed quality. However, there were several cases of poor quality seed from late infection by ascochyta blight. Growers are urged to treat seed for sowing in 2006 with a fungicide seed dressing and remain vigilant in controlling this disease.

Managing brome grass populations in wheat is a challenge facing many growers, however chemical and variety control options have improved over the years with the introduction of Clearfield wheat technology and now metribuzin tolerant wheats.

There was a 0.6 t/ha response to fertiliser, but no response to molybdenum (Mo) or lime. Plant tissue analysis showed that sodium molybdate (Na2MoO4) was effective applied as a seed dressing or banded with Flexi-N. The high Mo levels in these treatments indicate that application rates were much higher than needed. Grain analysis results confirmed that Mo was not limiting. Grain protein was about 9.0%, hectolitre weights 80 kg/hl, and screenings 3% in all treatments.

• Modest autumn grazing of no-till crop stubbles sometimes leads to small measurable increases in surface soil bulk density.
• In two seasons, on soils in the Mallee and Wimmera, modest autumn grazing of no-till crop stubbles had no measurable effect on crop yield, quality or weed seed burial.

Light to moderate grazing of sheep on no-till stubbles in autumn is unlikely to have detrimental impacts on crop growth in the following season.

• For a list of variety informaiton and yield results, please see the attached trial report.
• Some of these varieties are feed varieties and some are suitable for malt production. Please check with your seed supplier for this information. Also check on maturity and disease resistance before making a decision. 

• No till treatments have been higher yielding and more profitable in continuous cropping rotations. Cultivation has increased yield and profit in 18 month fallow rotations.
• Two cereals followed by a break crop of either fieldpeas or canola no till has been the most profitable rotation. Interestingly 16 years continuous wheat has not been too far behind.
• Weed spectrum and numbers have changed dramatically within rotations and tillage methods. Interestingly no till treatments have hosted less weeds than cultivated treatments.
• One year of no pre emergent herbicide has taken the trial back 6 years and allowed large numbers of ryegrass to again become established and set seed.

• After 18 years there was no standout rotation, in terms of profitability, in any given season. All  rotations had their pros and cons in both wet and dry years. Therefore having a mix
  of rotations and doing things on time is a recipe for a resilient business.
• The most profitable rotation for the duration of the trial was the continuous cropping rotation, which included two wheat crops followed by a pulse crop in a no-till system. The addition of the pulse crop every third year was beneficial, especially for adding extra nitrogen, however added issues such as broadleaf weed blowouts with weeds like fumitory.

• No till treatments, for all rotations, were slightly higher yielding than the conventional tillage
  treatments for wheat. The yield of peas, in rotation 2, was very low in this trial as a result of
  the season and Sakura damage.
• Rotations including a fallow, such as the WFW treatment, had lower weed numbers compared
  to continuous cropped rotations. The continuous wheat rotation, both conventional and no till
  treatments, had a large number of ryegrass, even with Sakura.
• Profit and income for 2015 was highest in the no till wheat/ley/fallow/wheat rotation, and lowest in Rotation 2.
• 17 years of no till wheat on wheat is still second for profitability.

This first year study has shown that the adoption of a strategic tillage practice (one-way plough) provided a significant improvement in terms of crop establishment and grain yields on a moderately repellent sandy gravel. The adoption of other agronomic options, such as paired-row sowing or wetters, in this instance did not provide any noticeable improvement in comparison to the control treatments. In fact, in one case (wetter 1), the cost of the treatment was not covered by the yield increase.

Without doubt, the tillage proved to be the most effective treatment for reducing SWR but at this stage it is not possible to evaluate the extent to which this improvement alone contributed to the significant increase in yields.

With this long term experiment, we expect the following seasons to give us more information to better understand what changes drive the yield increase and possibly the potential longevity of these improvements.

• Since this trial began in 2003, there has been no significant economic response to applied P. The most profitable treatment over five years was where either no P or 5kg P/ha had been applied.
• If considering reducing P rates in 2008, it is important that the amount of P that has been applied and removed over a 3-4 year period is calculated. If the P removal is not greater than P inputs then you can consider reducing P rates.
• The 5kg P/ha rate maintained a neutral P balance after the 5 years, whereas the control had a negative balance of just under 20kg P/ha. The higher rate treatments failed to utilize applied P and subsequently accumulated a positive balance greater than 20kg P/ha.

• Autumn removal of lucerne significantly decreased subsequent winter crop yields compared to spring removal of lucerne.
• Crops sown after spring removal of lucerne yielded the same as the crops grown in a continuous crop rotation.
• The crop yield penalty from autumn removal only lasts for one year.
• Apart from Grazon, all other herbicide treatments gave unacceptable lucerne control.
• Cultivation in combination with other herbicides will increase lucerne control by  20 to 30%. 
   

• Commercial viability has been difficult to demonstrate.
• Field trials demonstrated that the H Senor was able to accurately classify annual ryegrass in several broadleaf crops, including canola, faba bean, lentil and field pea.
• Other grass weeds such as brome grass and wild oats were also correctly identified as grasses in these crops.
• Broad leaf weeds were accurately classified in cereal crops, however this was more difficult due to the overlapping nature of the cereal crops at the time when the broadleaf weeds had emerged.
• Classification accuracy was lower for detection of grass weeds in cereal crops and broadleaf weeds in broadleaf crops, and these scenarios were not pursued for that reason.  

• Each foliar spray plot had a yield higher than the control. Blackjakyielded the highest followed by Sumisclex, then Bravo. 

• Metribuzin did demonstrate good crop safety on several varieties in 2010, which indicates it may be relatively safe for the late control of wild radish in some lupin varieties.
• However, 2010 was an incredibilly ‘soft’ finish which allowed plants to make unchecked compensatetory growth after the herbicide was applied.
• These trials will be repeated in 2011.

• Pasture cropping across subtropical grasses is viable in the West Midlands but success is dependent on effective weed control, adequate fertility and moisture, and winter dormancy (or suppression) of the perennial pasture.
• Pasture cropping can also provide out of season fodder, improve the feed value of stubbles, and reduce the likelihood of wind erosion and groundwater recharge on deep sandy soils.

• Lupin establishment was strongly affected by seed depth and by the herbicide application treatment.  In all treatments except metribuzin applied PSPE, plant density was higher at a sowing depth of 3 cm rather than 6 cm. The IBS application of metribuzin reduced plant density for both sowing depths, however the PSPE application only reduced density for the 3cm depth. In  comparison to the untreated plot.
• There was a significant herbicide treatment by sowing depth interaction on the visual herbicide damage score ( Figure ). The greatest damage was observed where lupins were sown at 6 cm and metribuzin was applied IBS.  However, with a damage score of 10-15, the symptoms were only slight with the effects reversable.  This was reflected in grain yield as overall there was no significant effect of the treatments, seeding depth or variety.  The mean grain yield for all treatments was 0.75 t/ha. 

There was no significant differences in grian yields resulting form the different lime sources, across any of the years within the trial, regardless of variety.

Soil pH data collected in 2019 show and increase in soil pH for all lime treatments in the topsoil (0-10CM) and 10-20cm, from the original data collection in 2015, at the beginning of the trial. 

Soil pH changes in 20-30cm layer have been negligible compared to the untreated control over six years. 

This trial shows that the addition of lime has improved soil pH to a depth of 20cm. The lack of improvement in grain yields over the nil control indicates that initial soil pH levels at this site were not low enough to be a constrain to grains yields.   

• The Seeder Demonstration enabled a large number of farmers to see and compare a wide range of seeding equipment in the one paddock on the same day.
• Machine depth and accuracy of seed placement affected plant establishment.
• A germination test is a simple process and can result in significantly better plant establishment.
• An incorrectly calibrated or set-up precision seeder will result in poor germination rates and potentially reduced yield.
• A well calibrated and set-up conventional seeder or knife point and press wheel seeder will result in good plant establishment rates and good yields.
• Cultivation had a negative effect on plant establishment.
• Prickle Chaining had a negative effect on plant establishment.
• Precision Seeders showed better plant establishment due to better seed placement, however this did not uniformly translate into a yield benefit.

• Allowing weeds to grow during summer reduced subsequent wheat yield by more than 50 percent
• Provided summer weeds were controlled, other surface treatments (slashed stubble, standing stubble, cultivation, bare earth) had little effect on crop yield
• Controlling summer weeds is one of the most cost-effective input investments available to growers in the Mallee, returning $5 for every $1 invested in this demonstration.

In years with high summer rainfall, growing break crops is low risk and is an effective management strategy for reducing weeds, while growing profitability. Two year breaks are better than one at achieving favourable returns and reducing brome grass populations. The best brome grass control and gross margins were achieved by two year rotations of Clearfield canola/vetch and continuous Clearfield wheat followed by wheat.

Variety choice was the management decision with the highest impact on grain yield and gross income compared to other management considerations.

•  Glyphosate was unable to control glyphosate resistant annual ryegrass on fencelines.
• Addition of other herbicides to glyphosate products improved control, but was still not effective.
• Two applications of Spray.Seed, Spray.Seed plus diuron or Alliance were the best registered treatments. 
   

• At present, group A herbicide resistance in barley grass is relatively low at a district level on the EP. However, growers need to act now to integrate multiple control tactics to prolong the effectiveness of these cheap and effective herbicides.
• In the absence of group A herbicides, it is still possible to achieve large reductions in barley grass seed bank in a legume pasture phase.
• When using moderate efficacy-low cost herbicides (Treflan + Logran) for barley grass control in wheat, effective control of the weed in previous pasture phase was critical.

• Increasing incidence of barley grass in cropping paddocks in southern Australia is likely to be associated with selection of more dormant biotypes by weed management practices used by growers.
• In some districts, barley grass management is now being complicated by the evolution of group A resistance. However, there appear to be several effective potential herbicide alternatives for barley grass control in broadleaf crops.
• Integrated weed management strategies are critical to delay onset of herbicide resistant barley grass.

• Rhizoctonia sererity was low in 1993.
• Cultivation of dry soil did not reduce the impact of rhizoctonia.
• Shallow sowing (2.5cm) may predispose plant roots to rhizoctonia.

At Kinnabulla, the best reduced tillage system to control rhizoctonia and increase yield was to cultivate, 5 to 10 cm below seed depth, in the week before sowing.

• The key to long term Rhizoctonia disease control is to keep inoculum in the soil low in the crop and pasture phases and increase the ability of crops to tolerate the infection (create environments where plant infection is reduced and plant tolerance to infection improved).
• The success of available disease control strategies, e.g. soil disturbance, fertilizer addition or fungicides is greatest at low to medium inoculum levels and their effectiveness declines as inoculum levels increase or where disease suppressive activity is low.
• Overall, effective control of rhizoctonia disease in cereal crops requires both the reduction of the pathogen inoculum in the soil prior to seeding and control of the infection process in the crop itself. This has to be achieved through management practices spread over more than one cropping season and through an integrated management strategy.

(i) Managing slug populations is unlikely to be successful unless both cultural and chemical control strategies are used. (ii) Research has found burning, light cultivation and rolling improves slug control. (iii) Control measures must be carried out before slug damage is observed. (iv) Paddocks with a previous history of slug damage are always a good place to start monitoring in a susceptible crop like canola. (v) Slug bait should be applied at a rate to provide sufficient bait points per m2 relative to slug populations in the paddock. (vi) Check the accuracy of your bait spreader to make sure there is an even distribution of bait across the spreading width. This width may not be the same as the width you spread urea. (vii) Identify slug species present in a paddock for the most effective control. Different species demonstrate different behaviours.

• Snail management is a three phase operation, occurring post harvest, during the growing season and at harvest.
• Knowing how many snails of each type and size are present is critical if appropriate management is to be applied.
• Snail density - above 30/m2 bait should be applied.

• Incorrect identification could be costly as with Take all and Crown rot require different management.
• Check the bases of plants for symptoms, don’t rely on whiteheads (which need not even be disease related).
• Even where whiteheads are not present, significant yield losses can occur.
• Know the risk of yield loss in your paddocks before sowing. For 2012 crops, this will mean sending summer/autumn soil samples to the Predicta B testing service for analysis.
• The most effective management tool for both diseases is host-free breaks.
• Where old cereal rows have medium to high inoculum levels, sowing between those old rows can reduce yield losses from these diseases, but only if the inter-row has low levels of inoculum.
• When Take-all inoculum levels are medium to high, the best option is a 12 month break from hosts. If susceptible cereals must be sown, keep the paddock(s) weed free and sow the atrisk paddock(s) last in the cereal cropping program.
• When crown rot inoculum levels are medium to high, the best option is a break from hosts (2-3 years may be needed). If cereals must be sown then barley is least likely to show yield loss, followed by oats and bread wheat. Do not apply excessive nitrogen early in the season.

Barley can be successfully grown on retained wheat stubble, but it is advisable to burn wheat stubble when growing wheat on wheat. If stubble is retained then Yellow Leaf Spot can be a devastating disease in a wet winter. The most important management practices when growing a cereal on cereal are as follows:

• Select paddocks with low numbers of grass weeds.
• Retain wheat stubble for barley, burn the stubble for wheat.
• Control summer weeds to ensure summer rainfall can be used by the crop.
• Use varieties with good disease resistance such as Silverstar or Krichauff.
• Disease - select paddocks with low disease pressure (monitor the previous crop) and DNA test the paddock prior to sowing.
•  Apply sufficient nitrogen for a good crop (soil test to know how much to apply).
• Barley on barley can lead to serious problems with leaf diseases such as net blotch.