Winter wheat cultivars Wedgetail and Rosella sown on 1 April were higher yielding than LRPB Scout sown on 6 May.

Reducing plant density to 50 plants/ m² did not reduce the ability of winter wheats to compete with a simulated weed population (tame oats) when sown on 1 April

Winter wheat sown early produced more dry matter for grazing than spring wheats sown in May.

• Highest yields in 2015 came from early sown (9 April) spring cultivars (with 8mm of irrigation for emergence).
• Winter wheats Wedgetail and RAC2341, sown 9 April, yielded more than Scout sown in the normal sowing window (8 May).
• Reducing plant density in early sown slow-developing wheats did not influence yield in either the presence or absence of weeds but did result in greater weed growth.

Ecopar proves to be a sound mixing partner to improve wild radish control

• Summary of 2 seasons esperiments

• Soil extractable B was 0.4 mg/kg.

• B fertiliser had no effect on September Dry matter (DM) (3.1 t/ha); Seed yield (1.1 t/ha) or N % in DM (3% N) or N in the seed (3.55%).

• B had no effect on %oil (42.8) or on oil yield .

  Notwithstanding the marginal B levels on acid sands of the SWA region, care needs to be taken on use of borax fertilizer as toxicity was induced in canola and lupin; with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary 1994 experiments

• Soil extractable B was 0.3 mg/kg.

• B concentration in dry matter (DM) 20 mg/kg

• B fertiliser had no effect on September Dry matter (DM) (2.9 t/ha); Seed yield (1.2 t/ha) or N % in DM (3% N) or N in the seed (3.50%).

• B had no effect on %oil (43.1) or on oil yield (515 kg/ha) .

  Notwithstanding the marginal B levels on acid sands of the SWA region, care needs to be taken on use of borax fertilizer as toxicity was induced in canola and lupin; with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary 1994 experiment

• Soil extractable B was 0.7 mg/kg.

• B fertiliser decreased seedling density (71 to 48).

• B concentration in dry matter (DM) 24 mg/kg B nil; 31 mg B kg for highest B application

• B fertiliser decreased the  September Dry matter (DM) by 0.62 t/ha; decreased Seed yield by 0.32 t/ha  &  increased N % in DM (by 0.46%) and  N in the seed (0.33% increase).

• B had decreased %oil (1.2% decrease in Oil%) & decreased oil yield by 142 kg/ha .

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola and lupin; with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required for the site with 0.7 soil extractable B.

• Summary 1994 experiment

• Soil extractable B was 1..1 mg/kg.

• B concentration in dry matter (DM) 30 mg/kg B nil; 36 mg B kg for highest B application

• B fertiliser decreased the  September Dry matter (DM) by 0.35 t/ha; decreased Seed yield by .27 t/ha  &  increased N % in DM (by 0.26%) and  N in the seed (0.33% increase).

• B had decreased %oil (1.63% decrease in Oil%) & decreased oil yield by 128 kg/ha .

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola and lupin; with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required for the site

• Summary 1994 experiment

• Soil extractable B was 0..4 mg/kg.

• B decreased seedling density (53 to 38).

• B concentration in dry matter (DM) 15 mg/kg B nil; 19 mg B kg for highest B application

• B fertiliser decreased the  September Dry matter (DM) by 0.48 t/ha; decreased Seed yield by 0.32 t/ha  &  increased N % in DM (by 0.3%) and  N in the seed (0.12% increase).

• B had decreased %oil (0.59% decrease in Oil%) & decreased oil yield by 144 kg/ha .

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola and lupin; with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required for the site with 0.40 soil extractable B.

• Summary 1995 experiment

• Soil extractable B was 0..4 mg/kg.

• B decreased seedling per sq. metre (50 to 39).

• B concentration in dry matter (DM) 17 mg/kg B nil; 22 mg B kg for highest B application

• B fertiliser decreased the  September Dry matter (DM) by 0.40 t/ha; decreased Seed yield by 0.2 t/ha  &  had no effect 0n N % in DM  and  N in the seed.

• B had decreased %oil (1.4 % decrease in Oil%) & decreased oil yield by 100 kg/ha .

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola and lupin; with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required for the site with 0.40 soil extractable B.

• Summary 1996 : summary of 2  experiment 

• Soil extractable B was 0.6 & 0.7 mg/kg.

• B application decreased seedling per square metre (63 to 48).

• B concentration in dry matter (DM) 27 mg/kg B nil; 36 mg B kg for highest B application

• B fertiliser decreased the  September Dry matter (DM) by 0.21 t/ha; decreased Seed yield by 0.137 t/ha  &  had no effect 0n N % in DM  and  N in the seed.

• B had decreased %oil (0.58 % decrease in Oil%) & decreased oil yield by 70 kg/ha .

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola and lupin; with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required for the site with 0.40 soil extractable B.

• Summary 1994 experiment

• Soil extractable B was 0.7 mg/kg.

• B application (Borax) decrease seedling emergence (57 to 42)

• B concentration in dry matter (DM) 22 mg/kg B nil; 27 mg B kg for highest B application

• B fertiliser decreased the  September Dry matter (DM) by 0.37 t/ha; decreased Seed yield by 0.17 t/ha  &  had no effect 0n N % in DM  and  N in the seed.

• B had decreased %oil (0.29 % decrease in Oil%) & decreased oil yield by 90 kg/ha .

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola and lupin; with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required for the site with 0.40 soil extractable B.

• Summary 1994 experiment

• Soil extractable B was 0.37 mg/kg.

• B fertiliser decreased seedling density (67 to 41).

• B concentration in dry matter (DM) 28 mg/kg B nil; 36 mg B kg for highest B application

• B fertiliser decreased the  September Dry matter (DM) by 0.62 t/ha; decreased Seed yield by 0.29 t/ha  &  increased N % in DM (by 0.43%) and  N in the seed (0.11% increase).

• B had decreased %oil (0.5% decrease in Oil%) & decreased oil yield by 124 kg/ha .

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola and lupin; with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required for the site with 0.37 soil extractable B.

• Summary 1996 : summary of 2  experiment 

• Soil extractable B was 0.6 & 0.7 mg/kg.

• B concentration in dry matter (DM) 27 mg/kg B nil; 36 mg B kg for highest B application

• B fertiliser decreased the  September Dry matter (DM) by 0.7 t/ha; decreased Seed yield by 0.217 t/ha  &  had no effect 0n N % in DM  and  N in the seed.

• B had decreased %oil (0.8 % decrease in Oil%) & decreased oil yield by 100 kg/ha .

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola and lupin; with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required for the site with 0.40 soil extractable B.

• Summary of   experiment

• Soil extractable B was 0.6 mg/kg.

• Plant density were not effected by B fertiliser (55-56 plants/m2)

• Plant B concentrations 19 -23 mg/kg.

• B fertiliser had no effect on seedling density; September Dry matter (DM) (3.43 t/ha); Seed yield (1.23 t/ha) or N % in DM (3.0 % N) or N in the seed (3.45 %).

• B had no effect on %oil (42.52) or on oil yield (535 kg/ha).

• Soil extractable B Hot CaCl2 of 0.6 was adequate

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary of   experiment

• Soil extractable B was 0.3 mg/kg.

• Plant density were not effected by B fertiliser (55-56 plants/m2)

• Plant B concentrations 15 -19 mg/kg.

• B fertiliser had no effect on seedling density; September Dry matter (DM) (3.8 t/ha); Seed yield (1.23 t/ha) or N % in DM (3.4 % N) or N in the seed (3.65 %).

• B had no effect on %oil (42.52) or on oil yield (485 kg/ha).

• Soil extractable B Hot CaCl2 of 0.3 was adequate

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary of  experiment

• Soil extractable B was 0.5 mg/kg.

• Planr density were not effected by B fertiliser (55 plants/m2)

• Plant B concentrations 21 -25 mg/kg.

• B fertiliser had no effect on seedling density; September Dry matter (DM) (3.84 t/ha); Seed yield (1.2 t/ha) or N % in DM (3.2 % N) or N in the seed (3.54%).

• B had no effect on %oil (43.8) or on oil yield (510 kg/ha).

• Soil extractable B Hot CaCl2 of 0.5 was adequate

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary of  experiment

• Soil extractable B was 0.5 mg/kg.

• Planr density were not effected by B fertiliser (55 plants/m2)

• Plant B concentrations 21 -25 mg/kg.

• B fertiliser had no effect on seedling density; September Dry matter (DM) (3.84 t/ha); Seed yield (1.2 t/ha) or N % in DM (3.2 % N) or N in the seed (3.54%).

• B had no effect on %oil (43.8) or on oil yield (510 kg/ha).

• Soil extractable B Hot CaCl2 of 0.5 was adequate

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary of 2 seasons experiments

• Soil extractable B was 0.94 mg/kg.

• B fertiliser had no effect on seedling density; September Dry matter (DM) (5.5 t/ha); Seed yield (1.71 t/ha) or N % in DM (3% N) or N in the seed (4%).

• B had no effect on %oil (40.8) or on oil yield (680 kg/ha).

• Soil extractable B Hot CaCl2 of o.9 was adequate

  Notwithstanding the marginal B levels on acid sands of the SWA region, care needs to be taken on use of borax fertilizer as toxicity was induced in canola with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary of 2 seasons experiments

• Soil extractable B was 0.4 mg/kg.

• Plant B concentration 20 -23 mg/kg.

• B fertiliser had no effect on seedling density; September Dry matter (DM) (5.5 t/ha); Seed yield (1.71 t/ha) or N % in DM (3% N) or N in the seed (4%).

• B had no effect on %oil (40.8) or on oil yield (680 kg/ha).

• Soil extractable B Hot CaCl2 of o.9 was adequate

  Notwithstanding the marginal B levels on acid sands of the SWA region, care needs to be taken on use of borax fertilizer as toxicity was induced in canola with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary of  experiment

• Soil extractable B was 0.6 mg/kg.

• Planr density were not effected by B fertiliser (53 plants/m2)

• Plant B concentrations 21 -24  mg/kg.

• B fertiliser had no effect on seedling density; September Dry matter (DM) (3.3 t/ha); Seed yield (1.0 t/ha) or N % in DM (3.0 % N) or N in the seed (4.30%).

• B had no effect on %oil (38.8) or on oil yield (350 kg/ha).

• Soil extractable B Hot CaCl2 of 0.5 was adequate

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary of  2 experiment

• Soil extractable B was 0.3 mg/kg.

• Planr density were not effected by B fertiliser (53 plants/m2)

• Plant B concentrations 18 -21   mg/kg.

• B fertiliser had no effect on seedling density; September Dry matter (DM) (5.9 t/ha); Seed yield (2.23 t/ha) or N % in DM (3.0 % N) or N in the seed (3.60 %).

• B had no effect on %oil (42.8) or on oil yield (950 kg/ha).

• Soil extractable B Hot CaCl2 of 0.3 was adequate

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary of   experiment

• Soil extractable B was 0.7 mg/kg.

• Plant density were not effected by B fertiliser (64 plants/m2)

• Plant B concentrations 22 -27 mg/kg.

• B fertiliser had no effect on seedling density; September Dry matter (DM) (5.1 t/ha); Seed yield (1.73 t/ha) or N % in DM (3.0 % N) or N in the seed (3.5 %).

• B had no effect on %oil (44.2) or on oil yield (750 kg/ha).

• Soil extractable B Hot CaCl2 of 0.7 was adequate

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary of   experiment

• Soil extractable B was 0.7 mg/kg.

• Plant density were not effected by B fertiliser (71-66 plants/m2)

• Plant B concentrations 29 -33 mg/kg.

• B fertiliser had no effect on seedling density; September Dry matter (DM) (3.63 t/ha); Seed yield (1.2 t/ha) or N % in DM (3.4 % N) or N in the seed (3.55 %).

• B had no effect on %oil (42.5) or on oil yield (500 kg/ha).

• Soil extractable B Hot CaCl2 of 0.7 was adequate

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary of   experiment

• Soil extractable B was 0.6 mg/kg.

• Plant density were not effected by B fertiliser (55 plants/m2)

• Plant B concentrations 23 -27 mg/kg.

• B fertiliser had no effect on seedling density; September Dry matter (DM) (3.4 t/ha); Seed yield (1.43 t/ha) or N % in DM (2.9 % N) or N in the seed (4.0 %).

• B had no effect on %oil (40.0) or on oil yield (540 kg/ha).

• Soil extractable B Hot CaCl2 of 0.6 was adequate

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary of 2 experiments

• Soil extractable B was 0.4 mg/kg.

• Plant B concentrations 20 -23 mg/kg.

• B fertiliser had no effect on seedling density; September Dry matter (DM) (4.76 t/ha); Seed yield (1.23 t/ha) or N % in DM (3.2 % N) or N in the seed (4%).

• B had no effect on %oil (44.8) or on oil yield (580 kg/ha).

• Soil extractable B Hot CaCl2 of 0.4 was adequate

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary of   experiment

• Soil extractable B was 0.4 mg/kg.

• Plant density were not effected by B fertiliser (56 plants/m2)

• Plant B concentrations 15 -18 mg/kg.

• B fertiliser had no effect on seedling density; September Dry matter (DM) (5.1 t/ha); Seed yield (1.73 t/ha) or N % in DM (3.4 % N) or N in the seed (3.45 %).

• B had no effect on %oil (44.52) or on oil yield (775 kg/ha).

• Soil extractable B Hot CaCl2 of 0.7 was adequate

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary of  2 experiments

• Soil extractable B was 0.8 mg/kg.

• Plant density were not effected by B fertiliser (70-65 plants/m2)

• Plant B concentrations 31 -36 mg/kg.

• B fertiliser had no effect on seedling density; September Dry matter (DM) (3.0 t/ha); Seed yield (1.02 t/ha) or N % in DM (3.3 % N) or N in the seed (3.6 %).

• B had no effect on %oil (41.9) or on oil yield (420 kg/ha).

• Soil extractable B Hot CaCl2 of 0.8 was adequate

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary of  2 experiments

• Soil extractable B was 0.7 mg/kg.

• Plant density were not effected by B fertiliser (59-56 plants/m2)

• Plant B concentrations 26 -30 mg/kg.

• B fertiliser had no effect on seedling density; September Dry matter (DM) (2.0 t/ha); Seed yield (1.55 t/ha) or N % in DM (3.43 % N) or N in the seed (3.6 %).

• B had no effect on %oil (41.9) or on oil yield (650 kg/ha).

• Soil extractable B Hot CaCl2 of 0.7 was adequate

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

• Summary of 3 seasons esperiments mainly located in the Yuna & Badgingarra region

• Boron (B) deficiency frequently occurs on soils that are low in organic carbon (C) (<1.0% organic C), pH (soil pHCa <5.0), and clay content (<5% clay). Acid sands with these soil properties are common in south-western Australia (SWA). Moreover, hot calcium chloride (CaCl2) extractable B levels are commonly marginal in the acid sands of SWA. This study examined the effects of soluble and slow release soil-applied B fertilizer and foliar B sprays on crops most likely to respond to B fertilizer on these soils, canola (oil-seed rape, Brassica napus L.) and lupin (Lupinus angustifolius L.).

  At 25 sites over three years, canola was grown with (0.34 kg ha-1) or without B applied as borax [sodium tetraborate decahydrate (Na2B4O7·10H2O) 11% B], and this was followed by nine experiments with B rates [0, 0.55, 1.1 kg ha−1, applied as borax or calcium borate (ulexite, NaCaB5O6(OH)6·5(H2O), 13% B] and foliar sprays (0.1% solution of solubor, 23% B) in 2000–2001. A further five sites of B rates and sources experiments were carried out with lupin in 2000–2001. Finally, foliar B sprays (5% B w/v as a phenolic complex) at flowering were tested on seven sites in farmers’ canola crops for seed yield increases. No seed yield increases to soil-applied B were found while foliar B application at flowering increased canola seed yield in only one season across seven locations. By contrast, borax fertilizer drilled with the seed at sowing decreased canola seed yield in nine of 34-farm sites, and decreased lupin yield in two of five trials. Toxicity from drilled boron fertilizer decreased yield could be explained by decreases in plant density (by 22–40%) to values lower than required for optimum seed yield. Seedling emergence was decreased by borax applied at sowing but less so by calcium borate. Foliar B spray application never reduced seed yield due to toxicity effects.

   

  Boron fertilizer drilled with the seed increased the B concentration in plant dry matter at early to mid-flowering. Boron application decreased the oil concentration of grain of canola at four sites. The oil yield of canola was significantly decreased at seven sites.

  Notwithstanding the marginal B levels on acid sands of the SWA region, care needs to be taken on use of borax fertilizer as toxicity was induced in canola and lupin; with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

A field trial was undertaken at Kinnabulla (VIC) in 2019 to investigate combinations of sowing time, seed rate and herbicide treatments to control brome grass in barley. Spartacus CL barley was used in this trial to enable the use of Intervix® for post-emergence control of brome grass. In 2019, the trial site received 181 mm rainfall during the growing season (April-October), which was 23% lower than the long-term average for the site. However in December 2018, the site received a heavy downpour of 199 mm, which created good growing conditions for barley crop grown in 2019. In this trial, barley seeding rate did not have a significant effect on either yield (P=0.213), brome panicles/m2 at maturity (P=0.889) or brome seed set/m2 (P=0.409). This lack of effect of crop seed rate on the number of brome panicles and seed set could be related to the high plant available water during the crop and weed life-cycle or due to Spartacus being a less competitive barley cultivar due to its erect architecture. Time of sowing had a significant effect on brome panicles/m2 at maturity and brome seed set/m2. TOS 2 had a lower brome panicle density at maturity than TOS 1 across all herbicide strategies, which was most likely due to low pre-sowing weed kill in TOS 1 as brome grass had not yet germinated. However, brome population that had germinated after the opening rains was killed by glyphosate application prior to seeding barley in TOS 2. As the numbers of panicles were lower in TOS 2, brome seed set was also reduced in TOS2 relative to TOS 1. Herbicide strategy had a significant effect on barley grain yield. As the herbicides reduced the impact of brome on barley, its yield increased from 3.24 t/ha in the knockdown treatment (NIL), to 3.72 t/ha in the pre-emergent herbicides only and to 3.96 t/ha when the pre-emergent herbicides were followed by post-emergent Intervix. Somewhat surprisingly, TOS 2 produced higher yields than TOS 1 across all the treatments, with the greatest difference being 0.46 t/ha in the Nil herbicide treatments. However, the yield difference between the two times of sowing decreased when more effective herbicides were used (0.08t/ha difference between TOS 1 and 2 in pre-emergent only and 0.04t/ha difference when pre-emergent herbicides followed by Intervix). Higher barley grain yield in the later sown crop is most likely due to a significantly greater weed density in barley in TOS 1 than in TOS 2, as large numbers of early germinating brome plants were controlled with glyphosate knockdown in TOS 2. TOS 1 also experienced a mild frost during flowering, resulting in patchy frost damage. Furthermore, May 23 (TOS 2) sowing date still falls within the optimum sowing window for Spartacus, which is an early maturity variety, and TOS 1 on April 29 was earlier than optimum for this variety.

A field trial was undertaken in 2019 to investigate combinations of faba bean sowing time, seed rate and herbicide treatments to control annual ryegrass. ARG plant density was significantly influenced by the time of sowing (P<0.001), herbicide treatment (P<0.001) and the interaction between the time of sowing and herbicide (P=0.012). The 3 week delay in seeding faba beans had no impact on ARG plant density, as shown by the similar ARG density in the simazine + trifluralin treatment. However, POST clethodim and butroxydim had much greater efficacy in the 2nd time of sowing (TOS 2) than in the TOS 1. The same trend was evident in ARG seed set when crop seeding was delayed. In the Simazine + Trifluralin (IBS) treatment there was only an 8% reduction in ARG seed production when seeding was delayed. However, Simazine + Trifluralin (IBS) fb Clethodim had a 62% reduction in ARG seed production in TOS 2 than in TOS 1. ARG seed production was also strongly influenced by faba bean seed rate (P<0.001). The high faba bean seed rate had 43% less ARG seed set compared to the low faba bean seed rate. This result indicates that faba beans can be highly competitive with ARG at the high seed rate. Faba bean grain yield was significantly influenced by crop seed rate (P<0.001), with the high seed rate yielding 14% and 30% higher than the medium and low seed rates, respectively. Herbicide treatment had a significant effect on faba bean grain yield. When POST clethodim was applied after the Simazine + Trifluralin IBS (1.55 t/ha), faba bean grain yield improved by 43% to 2.211 t/ha. Crop yield responses to herbicides treatments were consistent with their efficacy on ARG, which highlights the sensitivity of faba bean grain yield to weed competition. This study has shown that at high plant density, faba beans can provide a significant suppression of ARG. However, faba beans were very intolerant to weeds as shown by the large yield losses. Higher seed rates, are important to both increase competitiveness of faba beans in suppressing ARG, and to also maintain grain yield. However, fungal disease management would need to be monitored and managed effectively.

A field trial was undertaken at Washpool in 2019 to investigate combinations of wheat sowing time, seed rate and herbicide treatments to control annual ryegrass. The average seedbank of annual ryegrass (ARG) at the site was 2249 ± 284 seeds/m2. There was no evidence at this site of any reduction in ryegrass infestation in wheat by delaying sowing by three weeks between TOS 1 (77plants/m2) and TOS (74plants/m2). This result suggests the Washpool ARG population likely has a high level of seed dormancy, reducing the rate of ryegrass germination after the opening rainfall events. Herbicide treatment had a significant influence on ARG plant density (P<0.001). Boxer gold and Sakura + Avadex reduced ARG plant density by 45% and 73% from the untreated control (125 ARG plants/m2). Wheat was much more competitive against ARG when it was sown early. This was made evident by the large increase in ARG seed production when seeding was delayed. When averaged across all other treatments TOS 1 produced 1634 ARG seeds/m2, which was 73% lower than 5974 ARG seeds/m2 produced in TOS 2 (P=0.013). Wheat seed rate had a significant influence on ARG seed production (P=0.005), with the high wheat seed rate supressing ARG seed production by 37% when compared to the lowest wheat seed rate (100 seeds/m2). Wheat grain yield at this site was significantly influenced by the time of sowing (P=0.001), seed rate (P=0.001), herbicide treatments (P=0.001), and the interaction between the time of sowing and herbicides (P=0.011). Wheat was much more tolerant to ryegrass competition when sown early (TOS 1) as shown by the small increase in grain yield in herbicide treated plots. In contrast, there was a significant increase in wheat grain yield in herbicide treatments in TOS 2. The results of this study clearly show that delayed sowing of wheat allows for greater seed set by ryegrass and is also associated with a large yield penalty.

• Plants grown in small pots containing Mn deficient calcareous (pH 8.5, 80% CaCO3) sand collected from Wangary, S.A with 0-50 ppm added Mn in growth room at 15°C.
• Plants harvested at approx. 4 weeks (early tillering). Also 30 wheat cultivars were screened at Wangary using plant breeders' plots (4 rows x 5 m) with a split plot application of foliar MnSO (1 kg/ha ).
• Effects of seed soaking were evaluated for wheat and barley by soaking for 6 h with 1.5% MnSO4 prior to sowing.
• Without Mn, all cultivars showed no differences in growth and Mn uptake at 4 weeks (pots) but significant differences at 8 weeks in the field. With Mn supplied either in soil or on seed large cultivar differences were apparent at 4 weeks.
• Conclude that use of Mn efficient varieties coupled with a suitable seed Mn content will lessen the need for Mn fertilisers.

• Deep ripping to 500mm increased plant biomass, tiller numbers and ultimately yield, by 500kg/ha
• There was no significant difference in weed numbers between ripped and un-ripped treatments; however, weeds in the deep ripping treatment were bigger and had more seeds, therefore potentially a greater seed bank.
• The root lesion nematode species P. neglectus population increased over the season with a ten times higher increase in un-ripped compared to ripped soil. 

• Despite seed boron concentrations being very high (>20 mg/kg) there was no detectable effect on seedling emergence or growth.
• The amount of boron in the shoots was similar irrespective of the amount of boron in the grain.
• It would appear that grain boron is not mobilised to the developing seedling.

• Just 50 kg DAP/ha knife point drilled with 70 kg/ha wheat seed is enough to reduce wheat plant  establishment.
• Wheat fertilised with DAP with seed yielded 0.5 t/ha (20%) less than wheat with DAP placed below seed in 2016.
• The addition of 35 kg urea/ha below the seed overcame the yield penalty in the DAP-with-seed plots, suggesting access to N was a driver.

• Just 50 kg DAP/ha knife point drilled with 70 kg/ha wheat seed is enough to reduce wheat plant establishment
• Wheat fertilised with DAP with seed yielded 0.5 t/ha (20%) less than wheat with DAP placed below seed in 2016. 
• The addition of 35 kg urea/ha below the seed overcame the yield penalty in the DAP-with-seed plots, suggesting access to N was a driver.

• Blackleg infection of flowers, pods, branches and upper stems can be collectively termed as upper canopy infection (UCI).

• Early flowering of canola increases the risk of UCI.

• Fungicide can reduce disease levels and increase grain yield, but does not provide full disease control.

• Matching sowing date and varietal phenology so that flowering occurs in late winter will reduce UCI.

• Heat stress during the reproductive development phase significantly reduced grain yield, harvest index and oil percentage.
• Varieties respond differently to heat stress: Nuseed Diamond had the highest reduction in grain yield and oil percentage under heat stress, whereas ATR Stingray had the lowest reduction in grain yield.
• Under heat stress, seed formation is more severely affected than pod formation.
• Canola pods that appear healthy can produce less, or even no, seed, and therefore do not achieve yield potential under heat stress.

• A preliminary experiment in 2017 showed that extra heat can be applied to canola plots successfully using specially designed heat chambers.

• Heat stress of four days, applied seven days after flowering started, significantly reduced the grain yield of the flowers opening during that period.

• Four days of heat stress significantly reduced harvest index and thousand seed weight at the plot level, however, grain yield and biomass yield was not affected due to recovery during cooler nights.

• Further research is needed to extend the duration and intensity of heat stress to show differences, and for rigorous validation across different varieties.

• Yield responses were achieved when Hombre seed treatment was used at Frances and Conmurra sites in 2012.
• Crop rotation effects had a much greater impact on grain protein than whether a seed treatment was used or not.
• Reducing aphid activity reduces the risk of developing BYDV.
• Most occurrences of BYDV occur from aphid activity early in the season, so early protection is best 

• Yield responses were achieved when Hombre seed treatment was used at Frances and Conmurra sites in 2012.
• Crop rotation effects had a much greater impact on grain protein than whether a seed treatment was used or not.
• Reducing aphid activity reduces the risk of developing BYDV.
• Most occurrences of BYDV occur from aphid activity early in the season, so early protection is best 

• Yield responses were achieved when Hombre seed treatment was used at Frances and Conmurra sites in 2012
• Crop rotation effects had a much greater impact on grain protein than whether a seed treatment was used or not
• Reducing aphid activity reduces the risk of developing BYDV
• Most occurrences of BYDV occur from aphid activity early in the season, so early protection is best

Three years after application of lime, soil pH (CaCl2) increased by 0.68–1.45 units at 0–10 cm depth, 0.20–0.47 units at 10–20 cm and 0.08–0.18 at 20–30 cm depth. • Lime reduced density of ryegrass by 42% and barley grass density by 67%, improved barley crop vigour by up to 13%, and increased barley grain yield by up to 7% in 2013. • Boxer Gold in 2013 season together with Sakura and simazine in previous seasons reduced annual ryegrass density by 96% and barley grass density by 99%, improved barley crop vigour by up to 15%, and increased barley grain yield by up to 16%. • Lime effect on efficacy of herbicides in controlling weeds was not evident.

Three years after application of lime, soil pH increased by about 1 unit at the top soil and 0.08-0.26 units at the sub-soil layers. • The effect of liming improved crop vigour in 2013 by up to 16% and this effect reduced wild radish density by 50%. This reduction was however not significant, most likely due to low radish densities and a high level of variability. • Velocity together with simazine in previous seasons reduced wild radish density by 98% in 2013 season and improved crop vigour by up to 16%. • Lime increased barley grain yield by up to 6% and Velocity by up to 8%. • Lime effect on herbicide efficacy to control radish in barley crop was not evident.

Our results so far suggest that there is an important interaction between year (timing and distribution of rainfall) and soil and nutrient management. There were no significant treatment effects on grain yield in 2013 and 2015, but there were in 2014 and this may be related to autumn rainfall. At the end of March, 75 and 57 mm had fallen in 2013 and 2015 respectively (Figure 3), however, only 16 mm had fallen at this time in 2014. In 2014, soil water repellence as measured in a laboratory test was significantly higher in the no-till control treatments compared to the rotary spader treatments. Seedling density in 2014 was highest in treatments that had the highest soil water repellence, however, this effect did not carry through to grain yield which was lowest in the no-till control. This trial will continue for at least one more year.

 

• There was a significant yield difference due to liming in the Magenta and Roe plots; however, the Buloke plots were not significantly different.
• Soil pH increased from 4.68 to 5.24.
• This iste had a massive radish seed bank after poor control in lupins in 2008.

• Summary of  2 experiments

• Soil extractable Cu was 0.23 mg/kg.

• Plant density were not effected by Cu or N fertiliser (29-36 plants/m of row2)

• Plant B concentrations 26 -30 mg/kg.

• Cu fertiliser had no effect on seedling density; September Dry matter (DM) (2.0 t/ha); Seed yield (1.55 t/ha) or N % in DM (3.43 % N) or N in the seed (3.6 %).

• B had no effect on %oil (41.9) or on oil yield (650 kg/ha).

• Soil extractable B Hot CaCl2 of 0.7 was adequate

  Care needs to be taken on use of borax fertilizer as toxicity was induced in canola with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

• Boron not required

Wheat plant density was significantly affected by the planting arrangement (P=0.027) and the herbicide treatment (P<0.001). The Ribbon seeder system had the highest wheat density (196 plants/m2) as compared to the knife-point system (180 plants/m2) and the Zero row spacing (177 plants/m2). Wheat plant density in the inter-row space in the Zero row spacing treatment was reduced by Treflan + Avadex and Boxer Gold. Annual ryegrass plant density was only affected by the herbicide treatments (P<0.001). Pre-emergent herbicide activity was much lower than expected (24-29% efficacy) and is likely to be due to extremely dry soil conditions at the site (decile 1 growing season). Similarly, the reduction in ryegrass spike density by the herbicides relative to the untreated control was low and ranged from 6 to 24%. There was no significant reduction in ryegrass seed production by the herbicide treatment, which was surprising because Sakura and Boxer Gold did reduce ryegrass spike density. Ryegrass was able to produce 18-20,000 seeds/m2 in different herbicide treatments, which highlights the poor efficacy of pre-emergent herbicide in dry conditions. Herbicide treatments had a significant effect on wheat grain yield with Sakura producing the highest yield (2.31 t/ha), closely followed by Boxer Gold (2.13 t/ha). Sakura and Boxer Gold treatments increased wheat grain yield by 29% and 19% compared to the untreated control, respectively.  These results show that ryegrass was quite competitive against wheat under the dry conditions experienced in 2018. The treatment of Sakura ($40/ha) increased wheat yield by 0.5 t/ha compared to the untreated control, which would have improved the gross margin by $150/ha.

Wheat plant density was significantly affected by the planting arrangement (P=0.012). The Ribbon seeder system had the highest wheat density (171 plants/m2) as compared to the knife-point system (156 plants/m2) and the Zero row spacing (151 plants/m2). The establishment of wheat plants in the inter-row space in the Zero row spacing treatment was strongly influenced by the pre-emergent herbicide treatment (P=0.002). Trifluralin, Avadex or Boxer Gold were higher risk pre-emergent herbicides for wheat establishment, whereas Sakura appears much safer where wheat seed is placed on the soil surface in the Zero row spacing system. Annual ryegrass (ARG) plant density was not significantly affected by the planting arrangement (P=0.513) or pre-emergent herbicide treatments (P=0.13). ARG spike density was not significantly influenced by wheat planting arrangement (P=0.185). Herbicide treatment did have a significant influence on ARG spike density (P=0.023) and ARG seed production (P=0.003). The best performing herbicide treatment of Sakura + Avadex still produced 16824 ARG seeds/m2. While this is 51% lower than the Treflan + Avadex, it will replenish the soil seedbank to a highly problematic level for the future. Wheat grain yield was significantly affected by the planting arrangement (P=0.034) and the herbicide treatments (P=0.004). Even though the differences in wheat yield were small <10% for planting arrangement and <14% for herbicide treatments, they were statistically significant.

The herbicide treatment had a significant effect on ARG density (P<0.001) in this field trial at Minnipa. Favourable rain events in June were highly suitable for the activity of both pre-emergent herbicides investigated in this trial. Averaged across the row spacing and SBU treatments, Boxer Gold and Sakura + Avadex reduced ARG plant density by 88% and 90%, respectively. The density of ARG spikes was significantly influenced by the herbicide treatment.  Boxer Gold reduced ARG spike density by 74% compared to the untreated control, whereas Sakura + Avadex caused 85% reduction in ARG spike density. The density of ARG spikes in Sakura + Avadex were significantly lower than in the Boxer Gold treatment. ARG seed production was also significantly affected by the herbicide treatment (P<0.001) but not by wheat row spacing (P=0.272) or seed boot design (P=0.994). ARG produced 5740 seeds/m2 in the untreated control, which was reduced by 74% by Boxer Gold and 86% by the mixture of Sakura + Avadex. Presence of ARG at 190 plants/m2 in the untreated control, reduced wheat grain yield by 11% compared to Boxer Gold or 8% compared to Sakura + Avadex. However, it was still profitable to control ARG with effective herbicide treatments. Based on cash grain price of Australian Premium Wheat (APW) of $400/t in 2018, Boxer Gold would be expected to increase the gross margin by $68/ha as compared $12/ha increase for Sakura + Avadex.

• Demonstrated a strong dependence of wheat seedlings linseed manganese supply.
• Real manganese uptake can only be calculated if the initial seed manganese content is known.
• Seed soaking in manganese sulphate prior to selling greatly increase the seed manganese content although less than 20% of this manganese was recovered in the seedlings after 26 days.

• Sowing wheat 75mm deep compared to 40mm deep reduced crop establishment by up to 62% and wheat yield by up to 24%.
• Within the same variety small seed was much more sensitive to deep sowing than large seed.
• Corack and Mace were the least sensitive varieties to deep sowing in terms of yield.
• Growers should endeavour to use seed larger than 35 g/thousand seeds, especially if sowing into stressful conditions.

• New pre-emergence herbicides provided effective control of annual ryegrass under both knife point and disc systems.
• Good crop safety was observed with preemergence herbicides under knife-points; however, herbicide damage was evident under discs and was due to shallow seeding depth.

• For all varieties, the middle sowing date (4 December) resulted in higher grain yields than the early (11 November) or late (23 December) sowing dates.
• Varieties, N005A-80 and BidgeeA consistently achieved the highest seed protein concentrations.
• Varieties, SnowyA and BidgeeA achieved consistent seed protein concentrations across the three sowing dates, while later sowing dates reduced the seed protein of Djakal, N005A-80 and P176-2 varieties.

A field trial was undertaken at Mallala in 2019 to investigate combinations of wheat sowing time, seed rate and herbicide treatments to control brome grass. The average seedbank of brome grass at this site was 2877 ± 406 seeds/m2. The two week delay in sowing reduced average in-crop brome density from 567 plants/m2 to 352 plants/m2 (38%). Even though the reduction in brome density at Mallala was significant, it was a much lower reduction than that observed in the trial at Riverton (82% reduction). This difference in brome grass density with delayed sowing at these two sites highlights the large differences in seed dormancy between the populations of this weed species. Brome grass panicle density was significantly affected by wheat seed rate (P=0.039), and herbicide treatment (P<0.001) but not by the time of sowing (P=0.152). Increasing seed rate of wheat suppressed brome grass growth and reduced its panicle density. As wheat density increased from 100 seeds/m2 (low) to the highest seed rate (200 seeds/m2 – high) brome panicle density was reduced by 39%. These results support previous findings that higher crop density can be an important part of an integrated weed management program. Wheat grain yield increased consistently with the increase in seed rate or crop density. This trend correlates well with the improved suppression of brome grass panicle density observed in the trial. Not only did higher wheat density achieve superior weed suppression, it also provided a significant increase in grain yield. Herbicide treatments also had a highly significant effect on brome grass panicle density. However, there was no interaction herbicides and TOS or seed rate. This indicates that herbicides performed similarly in both times of sowing and the three seed rates. Sakura + Avadex significantly reduced panicle density as compared to Treflan + Avadex and Intercept (Clearfield technology) was used after pre-emergent Treflan + Avadex, it prevented brome plants from producing panicles (3 panicles/m2). Herbicide treatments had a large and significant effect on grain yield of wheat at Mallala (Figure 5). This is not surprising considering the high weed density present at the site and high competitive ability of brome grass. The treatment of Treflan + Avadex produced only 1.11 t/ha, which was significantly lower than the more expensive pre-emergent herbicide mixture of Sakura + Avadex (1.81 t/ha). However, when Intercept post-emergence herbicide was used, wheat yield increased further to 2.63 t/ha. In this trial, integration of Clearfield technology with pre-emergent herbicides not only prevented brome grass seed set as shown but the panicle density, it also delivered the highest grain yields.

A field trial was undertaken at Riverton in 2019 to investigate combinations of wheat sowing time, seed rate and herbicide treatments to control brome grass. The average seedbank of brome grass at the site was 1863 ± 303 seeds/m2. Brome grass at this site was effectively controlled (>80%) by delaying sowing by 2 weeks, with treatment effects from herbicide and wheat seed rate treatment only being significant in the early sown plots, where brome grass density was high. These results clearly indicate that brome grass population present at this site has very low seed dormancy and germinates readily after the season opening rains and can be effectively controlled with a knockdown herbicide. Wheat grain yield results reflected the level of brome grass control with herbicide and wheat seed rate treatments improving yields significantly as brome suppression improved. These treatments did not have a significant effect on yield when sowing was delayed because brome was effectively controlled by the knockdown herbicides. In the early sown crop when brome grass was controlled effectively with Intercept®, the 2 week delay in sowing caused a 9% reduction in wheat yield.

• There were large weed control benefits of delayed sowing of barley at Minnipa. However, when a highly effective pre-emergent herbicide was applied the benefit of delayed sowing was negligible.
• In barley a three week delay in sowing time did not significantly reduce grain yield as it did in the previous year in wheat. Lower yield penalty in barley from delayed sowing may be related to its earlier maturity and more competitive nature compared to wheat.

 

A field trial was undertaken at Minnipa in 2019 to investigate combinations of barley sowing time, seed rate and herbicide treatments to control annual ryegrass. The average seedbank of annual ryegrass (ARG) at the site was 4168 ± 411 seeds/m2. ARG plant density was significantly influenced by the time of sowing (P<0.001), herbicide treatment (P<0.001) and the interaction between the time of sowing and herbicide (P<0.001). There was a large impact of the 3 week delay in seeding barley on ARG plant density. This was particularly evident in the untreated control in which ARG density decreased from 676 plants/m2 in TOS 1 to 379 plants/m2 in TOS 2. This large reduction in ARG density due to delayed sowing is most likely related to rainfall events in early May, which would have caused weed emergence. Pre-emergence herbicides had higher efficacy in TOS 2 where the density of ARG plants had been reduced by the delay in seeding. This trend held through the season in the untreated control in which ARG spike density decreased from 306 spikes/m2 in TOS 1 to 199 spikes/m2 in TOS 2. In the trifluralin treatment, ARG produced 5078 seeds/m2 in TOS 2 as compared to 9192 seeds/m2 in TOS 1, a 45% reduction in ARG seed production. Unlike wheat in 2018, barley grain yield at Minnipa was not significantly influenced by the time of sowing (P=0.644). However, seed rate (P<0.001), herbicide treatment (P<0.001) and had a significant effect on barley grain yield. As stated earlier, there were large benefits of delayed sowing on weed control. In barley a three week delay did not significantly reduce grain yield as it had in the previous year in wheat. Lower yield penalty in barley from delayed sowing may be related to its earlier maturity than wheat.

Barley grain yield as significantly influenced by the time of sowing (P=0.025), seed rate (P<0.001) and the herbicide treatment (P<0.001). The delay of 4 weeks between the two sowing dates caused 22% (0.69 t/ha) reduction in grain yield or 25 kg/ha/day. Averaged over the two sowing dates and three seed rates, Boxer Gold treatment (2.996 t/ha) produced significantly greater barley grain yield than Treflan (2.634 t/ha) and the control (2.648 t/ha). Barley sown early (TOS 1) at high seed rate and sprayed with Boxer Gold produced 3.6 t/ha grain yield as compared to later sown crop (TOS 2) at low seed rate but treated with the same herbicide which produced 2.4 t/ha.

General application of Sakura + Avadex over the whole trial site provided good control of ARG. As a result, follow-up application of Boxer Gold @ 1.5 L/ha or 2 L/ha at GS 11 (1-leaf stage) did not significantly reduce ARG plant density.  Post-emergence application of Boxer Gold at 1.5 or 2 L/ha after pre-emergence Sakura + Avadex extended the period of weed control, which reduced spike density of ARG (P=0.02). At both sowing times, increase in wheat plant density from 100 to 200 plants/m2 reduced ARG spike density by 44%. Delayed sowing at this site reduced the competitive ability of wheat against ARG. Averaged across the seed rates and herbicide treatments, ARG produced 234 spikes/m2 in TOS 2 as compared to 75 spikes/m2 in TOS 1 (68% reduction in TOS 1). Additional post-emergence application of Boxer Gold significantly increased wheat grain yield (P=0.008) compared to the baseline treatment of Sakura + Avadex. Wheat yield increased by 9% or 0.4 t/ha with the additional post-emergence treatment of Boxer Gold as compared to Sakura + Avadex treatment alone. Wheat grain yield was also significantly affected by wheat seed rate (P<0.001). Wheat grain yield increased from 4.6 t/ha at the density of 100 plants/m2 to the maximum of 5.48 t/ha at the seed rate of 200 plants/m2. This yield gain of 0.9 t/ha clearly indicates that early sowing, wheat density of 200 plants/m2 and effective use of herbicides can have a large influence on the profitability of wheat in the HRZ.

Wheat grain yield at Minnipa was significantly influenced by the time of sowing (P=0.002), seed rate (P<0.001), herbicide treatment (P<0.001) and the interaction between the time of sowing and herbicide treatments (P<0.001). Averaged across the seed rates and herbicide treatments, wheat produced grain yield of 1.67 t/ha in TOS 1 as compared to 1.06 t/ha in TOS 2. There were large benefits of delayed sowing on weed control. However, these benefits came at a significant cost in wheat grain yield.

The trial site at Mallala was infested with a large seedbank of group A resistant brome grass, which made weed control in canola very difficult. Furthermore, the trial site experienced drought like conditions for most of the growing season which reduced the efficacy of atrazine. Even though the two-week delay in sowing reduced brome grass density from 927 plants/m2 in TOS 1 to 704 plants/m2 in TOS 2 (25%), this difference was not statistically significant.  However, the herbicide treatments (P=0.005) and the interaction between sowing date and herbicides (P=0.006) had a significant effect on brome grass plant density. Herbicide performance at the site was negatively affected by dry conditions and group A resistance in brome grass. As a result, even the best treatment combinations had more than 300 panicles/m2, which could lead to a large seed set in brome grass. When averaged across the sowing time, seed rate and herbicides, HyTTec Trophy produced 38% higher grain yield than Bonito. This difference in variety performance is consistent with superior crop establishment in HyTTec Trophy than Bonito. As a result of herbicide resistance in brome grass, yield increase in the Verdict treatment compared to the control (atrazine POST) was non-significant. However, use of clethodim increased yield by 61% compared to the control, which was statistically significant.

Barley plant density was significantly influenced by the time of sowing (P=0.025) and crop seed rate (P=0.002).  Averaged across the seed rates and herbicide treatments, the first time of sowing (TOS 1) had barley density of 125 plants/m2 compared to 82 plants/m2 in TOS 2, which was related to dry soil conditions after sowing in TOS 2. Brome grass plant density was significantly affected by the time of sowing (P=0.018) and the herbicide treatments (P<0.001).  The 4-week delay in sowing between TOS 1 and TOS 2, allowed greater emergence of brome grass seedlings before the sowing of the TOS 2.  Consequently, barley sown at TOS 2 had 48% lower brome grass infestation (107.9 plants/m2) than in TOS 1 (207 plants/m2). As expected, herbicide treatments had a significant (P<0.001) effect on brome grass density. When averaged across the sowing time and seed rates, the treatment of Treflan + Avadex was only moderately effective and reduced brome grass density by 36% (173 plants/m2) relative to the untreated control (271 plants/m2). In contrast, the same pre-emergent treatment (Treflan + Avadex) followed by Intervix reduced brome grass density by 90% (28 plants/m2). When averaged across seed rates and herbicide treatments, the time of sowing barley had a significant effect on its grain yield (P=0.011). TOS 1 produced 940 kg/ha greater barley grain yield than TOS 2. The post-emergence application of Intervix to the crop treated with Treflan + Avadex further increased barley grain yield by 872 kg/ha. These results are consistent with the trends in brome grass density and panicle production. The untreated control plots produced 40% lower grain yield than the Intervix treatment, which completely controlled brome grass. These results highlight the strong competitive ability of brome grass in cereals.

The average seedbank of ARG at the site was 3932 ± 270 seeds/m2. ARG plant density was significantly influenced by the time of sowing (P<0.001), herbicide treatment (P<0.001) and the interaction between the time of sowing and herbicide (P<0.001). The delay in seeding from TOS 1 to TOS 2 (16 weeks) caused a large reduction in ARG plant density. This was particularly evident in the untreated control in which ARG density decreased from 825 plants/m2 in TOS 1 to 31 plants/m2 in TOS 2 (96% reduction). This large reduction in ARG density due to delayed sowing is most likely related to an effective knockdown herbicide treatment after most ARG had emerged before TOS 2. Herbicide treatments reduced ARG plant density significantly in TOS 1, however herbicide effect on ARG plant density in TOS 2 was non-significant, possibly due to a much lower ARG density. While the delay in sowing significantly reduced ARG plant density (P<0.001), it did not significantly reduce ARG seed spikes (P=0.495). This result indicates that despite low ARG plant numbers in TOS 2, faba beans failed to compete effectively with ARG and suppress its growth. As a result, even at a relatively low density ARG was able to produce a large amount of seed for future infestations. Faba bean grain yield at Frances was significantly influenced by the time of sowing (P=0.033), seed rate (P<0.003), and herbicide treatment (P<0.001). Averaged across the seed rates and herbicide treatments, faba beans produced grain yield of 1.34 t/ha in TOS 1 as compared to 1.81 t/ha in TOS 2. Superior faba bean grain yield in TOS 2 In 2018 at Frances is most likely due to the reduction in ARG plant density.

A field trial was undertaken at Frances in 2019 to investigate combinations of barley sowing time, seed rate and herbicide treatments to control annual ryegrass. The average seedbank of annual ryegrass (ARG) at the site was quite low (472 ± 143 seeds/m2), which was reflected in low plant density at the site. ARG plant density was significantly influenced by the time of sowing (P=0.037), and herbicide treatment (P=0.009). There was a 37% reduction in ARG plant density between TOS 1 (20 plants/m2) and TOS 2 (13 plants/m2). Herbicide treatment had a significant effect on ARG plant density, with Boxer Gold showing lower efficacy on ARG than Treflan and Boxer Gold + Treflan. Unlike ARG plant density, ARG spike density was not influenced by time of sowing (P=0.171). ARG spike density was significantly influenced by barley seed rate (P=0.016), herbicide treatment (P=0.01) and the interaction between TOS and herbicide treatment (P=0.019). ARG spike density was 34% and 40% lower in medium and high seed rates respectively when compared to the low seed rate. These results suggest an improvement in ARG suppression from increasing barley competiveness with increased seed rate. Barley grain yield at the site averaged 6.6 t/ha. Herbicide treatment had a small (4-6%), but significant effect (P=0.009) on grain yield with Boxer Gold < Treflan ≤ Boxer Gold + Treflan for barley yield.

• Small pointed snails are an increasing problem in the Albany and Esperance port zones.
• A grower survey shows that while many farmers engage in a snail baiting program, 60% of these are unsure as to the efficacy of baiting on small pointed conical snail control.
• Caged trials show that all active ingredients in snail baits cause mortality to snails, however the amount of active ingredient has no effect on the rate of mortality, it is the number of bait points that has the most impact on numbers of snails killed.
• There is no difference in the efficacy of a rainfast versus a non-rainfast bait. However, caged trials suggest that non-rainfast baits lose their integrity after 14 days.

• The soil treatments investigated at these sites are considered to be ineffective for broad acre farming.
• Changes to nematode composition and microbial biomass were small and did not result in plant biomass production.
• Inprovements in the effectiveness of the soil treatments may occur when applied as seed dressings.

• Plant densities varied with seed rate, time of planting and variety.
• Quinilock showed the greatest response in protein level to delayed planting time.

• Zinc oxide fertilisers had lower solubility and dissolution than zinc sulphates.
• Zinc oxide was as effective as zinc sulphate if it was mixed with the soil but not when banded near the seed.
• Zinc sulphate would be preferable to zinc oxide in no-till systems where fertiliser is banded.

• In 2013, newer varieties of medic (Sultan-SU), vetch (RM1 an Timok) and forage pea (PBA Hayman) when cut at the same time (different stages between maturities) performed better or equally as well in forage values as previously used varieties.
• Choose forage legume varieties to suit your paddock system needs.
• Consider group B herbicide tolerance, disease and aphid resistance, the type of seed (hard or soft) and growing season length of newer varieties to suit grazing, hay and/or seed production.

• High operational speed reduced sowing depth of both disc and tyne openers.
• Counts of unsprayed (nil) annual ryegrass were greater for the tyne machine than the disc seeder at 8km/h and 14km/h.
• Within the applied herbicide treatments herbicide efficacy was fairly high. 
• all standing stubble and poor seed placement at 8km/h and 10km/h by the tyne machine severely affected crop establishment.
• At 14km/h the discs ability to penetrate the soil was greatly reduced, impacting sowing depth.
• Barley yields were higher for the disc sown treatments than the tyne sown treatments.

• Phosphorus rates of 10 and 20 kg/ha applied in various straight, compound, coated and liquid fertiliser forms were not found to result in any significant responses in grain yield or quality.
• Results were impacted by the failure to control a population of herbicide-resistant annual ryegrass at this trial site using both pre- and post-em herbicide options, resulting in a high variability between plot measurement.

• In 2017 the removal of a high barley stubble load resulted in better medic plant numbers late in the season (September), and increased (but still very low) dry matter production.
• Heavy barley stubbles from harvesting either high or low resulted in similar medic regeneration.
• Treating heavy barley stubbles with either rolling, a light tickle or left standing did not change medic establishment or dry matter production in 2017.

There were no differences in medic regeneration in wheat stubbles either harvested at two heights, left standing or rolled.

• What are host farmers thoughts?

- The trial gave the Sparkman’s the knowledge that this method of regenerating salt land pastures was not effective and that clay seed ball dispersal by air would not be feasibly.
- How are farmers going to plant in these areas in the future?
- With less salt affected sites the clay seed ball method could work. The clay seed ball seeds germinated under Greenhouse conditions so that there is a possibility of germination in more favourable conditions.

• What is the prospect of clay ball seeding in the future?

- Clay ball seeding has been effectively used in the MurrayDarling river system pre the 2000 drought (ABC Landline story) and near Geraldton to grow Tagasaste on non wetting soils (personal communication - RH Logue).
- However the clay seed ball method may work with less salt affected sites.
This trial showed that regenerating salt land pastures by this method was not effective on the harsh sites at the Sparkman property.

• Bambatsi Panic and Rhodes grass have good drought tolerance but maintaining a high plant density has proved difficult.
• Due to low rainfall seasons, more drought tolerant species are required on the site hence planting the saltbush alleys.
• Salinity varies over the site and therefore so does the ground cover, species composition and FOO.
• Roly-poly control can be achieved by spraying with 2,4-D Ester ad Garlon and rolling.

The following report provides a handy technique for estimating pasture legume seed reserves in paddocks. The method involves simulating the season's break by watering an area of ground and counting the subsequent germinating of medic or sub clover plants.

• The highest yielding pulse in 2003 at Euabalong was field peas, followed by lupins and then vetch.
• All pulse crop gross margins were negative, reflecting the cost of seed, the cost of herbicides and the effect of drought on grain production.

• Loose smut in barley is internally seed borne so if you are seeing infected heads then it means your grain souce was contaminated. It is the hardest of the smut diseases to control because it is an internally seed borne infection and most current seed treatments are not as effective on internally seed borne diseases.
• EverGol Prime has excellent local systemicity, being able to move across the seed wall and into the seed. It is an excellent option for control of loose smut.
• The applicaiton of Sakura into barley was not successful with the APVMA. Therefore we will not review the results as this component of the trial in regard to the interactions with pre-emergent herbicides.

• All treatments met Hindmarsh food grade parameters although loose smut was not tested for, which may have excluded the untreated from delivery due to its levels of infection.
• There was no significant difference in yield between treatments.

• Production of alternative pulse options to field pea in low rainfall regions has potential to be successful under favourable seasonal conditions providing essential production criteria are met.
• Some new varietal options offer earlier maturity as well as improvements in harvestability, disease resistance and herbicide tolerance over older commercial standards, aiding production and profitability.
• Field peas have proven to be a reliable option on the upper Eyre Peninsula and are likely to be a lower risk and more profitable option in seasonal conditions that are less favourable for alternative pulse options.
• Chickpeas are generally less suited to many cropping regions of South Australia, and with a change in the ascochyta blight pathogen growers need to carefully consider their risk to AB infection and ability to effectively control the disease, including in low rainfall regions.

• This and other research demonstrates that it is possible to improve crop establishment and productivity on water repellent soils using modified furrow sowing techniques.
• Banded wetting agents are helpful with early dry or partially dry sowing before opening rains but show less benefit later in the sowing program when there has already been rain and the soil has started to wet up more (see Banded wetting agent paper WMG 2012 research annual). In very erodible conditions with high wind erosion risk the use of this strategy may be safer than the options with winged points or boots due to less soil disturbance and release of root anchorage for existing plant cover. Optimal wetting agents for WMG areas still need identification.
• Winged points and winged-paired row systems perform better than knife points under certain soil conditions but the benefits are variable and in some sowing conditions may provide little benefit. Further research is required. Winged points look most attractive when shallow moist soil can be ‘delved’ to the seed zone to provide early establishment (as in the winged knife point on the gravelly sand with shallow moisture).
• Simple approaches like sowing next to or at a shallow angle across the previous year’s crop row and broadcast spreading a portion of the seed in front of the seeding tynes are relatively simple approaches that can provide establishment benefits.
•  

Leaf rust assessments on this trial have shown that Epoxiconazole at 375 ml/ha had the best response in this trial. The Powdery Mildew infection level were very low but there still was some response. A late application of Propiconazole at Z45 was the best performer with 0.47% infection of Powdery Mildew. Tilt Xtra (Propiconazole + Cyproconazole) was the second best result with 0.73% infection.

Good establishment and weed control is more important than varietal selection for productivity and persistence of lucerne • There was no significant difference in establishment or biomass production between lucerne varieties in 2007 and 2008 • This trial will continue in 2009 to further evaluate persistence and productivity

• Selecting wheat varieties with stripe rust resistance (rating 7-8) is the most effective form of managing the disease, however the limited number of varieties with the combination of desirable agronomic traits and sufficient resistance will see the continued need for fungicide control strategies
• Yields of H45 (very susceptible to stripe rust) were maximised by keeping the crop free from disease until flag emergence and, most critically in high yielding situations, following up with a foliar fungicide.

• A single slug baiting was ineffective at controlling slug populations.
• Direct drilling into a heavy cereal stubble from a previous crop can result in significant slug damage to canola, even with a single baiting.
• Cereal stubble removal by burning, will significantly reduce the amount of slug damage.
• Cultivation prior to sowing will have a positive effect on reducing slug numbers and damage to canola.
• An integrated pest management approach is required to control slugs effectively. Each treatment alone does not adequately control slug populations.

• The presence of oats reduced barley yields from no significant reduction up to 31.27%.
• Varieties FathomA and CommanderA were the most effective varieties at suppressing oat development.
• BassA and BulokeA demonstrated no significant yield reduction in the presence of oats.

• Two trials were conducted to compare dry matter production and subsequent grain yield from cereal crops. In one trial four cereal crop species wheat (Mackellar), barley (Urambie), triticale (Breakwell), and oats (Bass) were compared. With a longer vegetative period, a second DM cut was able to be taken from Bass oats and consequently total DM production was significantly higher than from Mackellar which in turn produced significantly more DM than Breakwell and Urambie. Grain yield was significantly higher from Breakwell (9.4 t/ha).
• In a second trial, 7 wheat varieties and breeding lines were compared. There were statistically no differences in DM production between the wheats. The CSIRO line 95102.1 and Alberic were the highest grain producers.

Mackellar wheat showed the most potential as a dual purpose crop with the highest grain yield and DM production comparable to all other varieties except Bass. The latter produced the most fodder but the lowest grain yield. There was no significant difference in DM
production between Mackellar, Breakwell, Urambie and Franklin however there was a large difference in when this was produced. Franklin barley (and a Chinese line) were far more vigorous early whereas the later developing varieties, in particular Bass, tended to produce less DM but extra cuts ensured a higher total DM.

Due to unforseen circumstances, results for 2011 aren’t available for the Seedmark pasture evaluation sites. Seedmark do however look forward to continuing their work with MFMG in 2012 to explore the most appropriate Forage/Pasture rotation options.

The Field Days did however see the release of the new pasture variety “Monti” bred and developed by SARDI’s pastures group and released by the Australian Pasture Alliance (APA), an alliance between SARDI and Seedmark. Struan based SARDI researchers Andy
Craig and Freya Hawker lead the development of Monti with an extensive evaluation program run across a number of research site for the last 4 years. Below are some photos from the event.

• Pie-sowing treatments of trifluralin herbicide are effective in increasing yields in a barley crop infested with Vulpia. Application rates of 3.0 1/ha produced a significant result, while application rate of 1.5 1/ha produced a strong trend.
• No significant differences could be demonstrated between Post-sowing treatments employed in this trial due to large variations between plots. However averaged results indicate trends that can be further explored with more trial work. 
• For further conclusions please see the attached trial report.
   

• Mungbean yield potential ranged from a low of 0.81 t/ha up to a high of 2.70 t/ha in three years of irrigated variety evaluation experiments at Trangie in the Macquarie Valley.
• Jade_AUA (released 2013) is the recommended variety for Macquarie Valley mungbean growers with the highest yield potential, largest seed size (an important quality attribute for marketing) and best disease tolerance package. CrystalA would be an adequate second-best option based on yield and potential seed size.
• Niche mungbean varieties such as Regur (black gram type), and the two small-seeded lines Celera IIA and Green DiamondA, would have to command a substantial premium for their respective seed quality attributes to compensate for the poorer yield potential demonstrated in these experiments.

• Brome grass is increasing in prevalence across southern Australia and control in cereals is heavily reliant on Group B herbicides (sulfonylurea and imidazolinones).
• Experimental herbicides evaluated in this study were effective on brome (>90% control), but were also unsuitable for barley causing severe crop damage; trials undertaken this season (2017) will focus on wheat.
• Identifying effective but safe herbicide options for brome in cereals remains a high priority.

There was no take-all evident in the second cereal (wheat on wheat) trial and as a consequence no seed treatment differences in yield, however there was evidence of late season leaf rust control in the second wheat trial.

Removal of subsoil compaction by deep ripping resulted in a 370 kg/ha (45%) yield benefit with spading giving an additional benefit of 12% (100 kg/ha) and mouldboard ploughing 39% (320 kg/ha) compared with the deep ripping treatment. Higher biomass and increased head density in the cultivation treatments are indicative of improved nutrient access and effcient use of available water through the season. Water use efficiency was 4.9 kg/ha/mm of growing season rainfall for the control treatment compared with 7.1 kg/ha/mm for ripped, 7.6 kg/ha/mm for spaded and 8.9 kg/ha/mm for mouldboard ploughing. Recent research is showing that nutrient availability is improved when top soil is buried by spading or mouldboard 
ploughing because nutrients become concentrated in the rootzone and less suscpetible to soil drying from evaporation, which can be the case when majority of the nutrients are on the soil surface, (Davies et al, 2012).